Manual Ferm FDAG 750 (page 7 of 52) (English, German, Dutch, French, Italian)

79094

Zoom out

Zoom in

1/52

Ferm

The machine must always work opposite to the •

direction of rotation. Therefore, never move the

machine in the other direction! Otherwise, the

danger exists of it being pushed uncontrolled

out of the cut (Fig. 7).

Inspect the grinding disc regularly. Worn discs •

have a negative effect on efficiency of the

machine. Replace the grinding disc on time.

Do not put the machine down when the motor •

is still running. Do not place the machine on a

dusty surface. Dust particles may enter the

mechanism.

Always switch off the machine first before •

removing the plug from the wall socket.

Never use the spindle lock to stop the

motor.

5. SERVICE & MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate over

a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Cleaning

Keep the ventilation slots of the machine clean to

prevent overheating of the engine. Regularly clean

the machine housing with a soft cloth, preferably

after each use. Keep the ventilation slots free from

dust and dirt. If the dirt does not come off use a

soft cloth moistened with soapy water. Never use

solvents such as petrol, alcohol, ammonia water,

etc. These solvents may damage the plastic parts.

Lubrication

The machine requires no additional lubrication.

Trouble shooting

Below we have listed a few probable causes and

solutions to which you can refer if your circular

saw does not function properly.

1. Machine fails to operate.

Power turned off.•

(Extension) cable damaged.•

2. The elektromotor hardly reaches maximum

speed.

The extension cable is too thin and/or too long.•

The mains voltage is lower than 230 V.•

3. Machine overheats.

Air vents are blocked. Clean them with a dry •

cloth.

The machine has been overloaded. Use the •

machine for the purpose it is made for.

4. Excessive sparking or elektromotor runs

irregular.

There’s dirt inside the motor or the carbon •

brushes are worn.

Replace the carbon brushes or bring the •

machine to a specialized repair centre.

Faults

Should a fault occur, e.g. after wear of a part,

please contact the service address on the

warranty card. Separately you will find an

exploded view showing the parts that can be

ordered.

Environment

To prevent damage during transport, the appliance

is delivered in a solid packaging which consists

largely of reusable material. Therefore please

make use of options for recycling the packaging.

Damaged and/or disposed of electrical

or electronic devices must be dropped

off at recycling stations intended for that

purpose.

Warranty

For the conditions of warranty, please refer to the

separately provided warranty card.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm FDAG 750 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 11,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm FDAG 750 Manual

Product: