46 Ferm
ROUTER
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
PACKAGE CONTENTS
1 Router
1 Cutter (router bit)
1 Parallel guide
1 Guide bush
2 Screws
2 Nuts
1 Adapter for dust extraction
1 Wrench
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
PRODUCT INFORMATION
Fig. A
The FBF-1000E router has been designed for profes-
sional routing of wood, wood products and plastics.
1 on/off switch
2 handle
3 router base
4 locking bolt for parallel guide
5 opening for parallel guide
6 collet nut
7 spindle lock
8 revolver-depth stop
9 locking bolt depth stop
10 depth stop
11 clamping lever
12 scale cutting depth
13 adjusting wheel electronic speed control
14 height adjusting button
15 adapter for extracting dust
16 dust outlet
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
• Check workpieces for any protruding nails etc. and
remove these.
• Keep your hands away from the surface to be cut.
ELECTRICAL SAFETY
Always check that the power supply corresponds to
the voltage on the rating plate.
Your machine is double insulated in accordance
with EN 50144; therefore no earthwire is required.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm2. When using a cable reel always unwind
the reel completely.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1000 W
No load speed/min | 9000-30000
Max. cutter diameter | 30 mm
Cutting depth | 30 mm
Collet | 6 & 8 mm
Weight | 3.8 kg
Lpa (sound pressure) | 85.6 dB(A)
Lwa (sound power) | 98.6 dB(A)
Vibration value | 1.1 m/s2
Ferm 3
SPARE PARTS LIST
REF.NR. DESCRIPTION FERM NR.
4 SPEED REGULATOR 302100
5 DEPTH KNOB 302101
6 COPPE BUSH 312004
8 BRUSH HOLDER 312004
9 ENCLOSURE 312002
17 SWITCH 302057
18 PULL-BACK BAR 302102
19 SWITCH ACTUATOR 302103
23 STATOR 302104
27 BEARING 60018 800608
28 ROTOR 302105
31 BEARING 80103 806003
33 SPRING FOR COLLET 302106
34A COLLET 312008
34A COLLET 312012
35 CHUCK NUT 312009
36 RUBBER CAP FOR HANDLE 302058
39 LOCKING LEVER 302002
42 GEAR 302107
43 BLOCK STOP 302107
44 SPEED REGULATOR 302107
46 RACK BAR 302108
47 HANDLE 302058
51 ROTARY SWITCH 302109
54 PAWL SPRING 302110
55 BRAKE RACK 302110
57 BUTTON FOR BRAKE RACK 302110
62 DUST TUBE 302111
72 SCREW 302112
73 SPING 302112
74 PLASTIC BOTTOM PLATE 302113
78 ROD B 302005
79 ROD A(WITH SCALE) 302005
80 GUIDE FRAME 302114
81 SPRING WASHER 302005
82 HOLLOW-HEAD SCREW 302005
84 PLASTIC LINER 302115
86 WRENCH 312011
87 SCALE PLATE 302107
