Manual Ferm ETM1001 - FET-100 (page 4 of 24) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

763859

Zoom out

Zoom in

1/24

Ferm 45

ASSEMBLY INSTRUCTIONS

DESCRIPTION

Fig. 1

1. Safety catch

2. Slide

3. Cartridge haft

4. Switch

APPLICATION

Fig. 2

The tacker enables you to fasten various materials, such

as fabric, wood, gauze, cardboard and leather. There-

fore, the tool is suitable to upholster furniture, to wrap

objects or to repair shoes.

For this tool, use one of the following types staples or nails:

•U: 6, 8, 10, 12, 13 or 14 mm

•T: 14 mm

•I: 14 mm

Suitable staples and nails are provided by Esco, Rapid,

Novus and Wolfcraft.

LOADING THE TACKER

Before opening the tool, make sure the tool is dis-

connected.

TO LOAD THE TACKER

Fig. 3 - 5

Unlocking slide

1. Turn the metal rear plate of the slide to unlock the

slide.

Placing staples

2. Remove the slide from the tool.

3. Place the staples or nails in the cartridge

Placing nails

4. Replace the slide in the tool.

5. Lock the slide by fastening the metal rear plate.

USING THE TACKER

Fig. 6 - 8

Placing the tool

1. Place the tool with point A at the spot where the sta-

ple or nail should be located.

2. Press the tool down firmly.

Pressing safety catch

3. Press the safety catch and hold it in this position.

Stapling

4. Press the switch.

The tool will cause a rebound because of the force it

operates with. Keep this in mind.

TROUBLESHOOTING

In case of malfunction, disconnect the tool immedi-

ately.

In case a staple or nail is jammed in the tool, fol-

low the procedure below

1. Disconnect the tool.

2. Carefully remove the staple or nail from the tool with

a thin object (for example a knife).

4Ferm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ETM1001 - FET-100 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm ETM1001 - FET-100 Manual

Product: