Manual Ferm ESM1008 - FROS-450 (page 5 of 36) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763830

Zoom out

Zoom in

1/36

68 Ferm

Vi erklærer herved, udelukkende på eget ansvar, at dette produkt opfylder følgende standarder

eller standardiserede dokumenter:

EN60745-1, EN60745-2-4, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3

i overenstemmelse med direktivreglerne

98/37/EEC, 73/23/EEC, 89/336/EEC

01-02-2006

ZWOLLE NL

W. Kamphof

Quality department

Det er vores hensigt til stadighed at forbedre vores produkter, og vi forbeholder os derfor til

enhver tid retten til at ændre produktspecifikationerne uden forudgående varsel.

Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • Holland

CE KONFORMITETSERKLÆRING (DK)

Ferm 5

• Use safety glasses, especially when sanding above your head.

Electrical safety

When using electric machines always observe the safety regulations applicable in your country

to reduce the risk of fire, electric shock and personal injury. Read the following safety

instructions and also the enclosed safety instructions.

Keep these instructions in a safe place!

Always check that the power supply corresponds to the voltage on the rating plate.

The machine is double insulated in accordance with EN50144; therefore no earth

wire is required.

Replacing cables or plugs

If the mains cable becomes damaged, it must be replaced with a special mains cable available

from the manufacturer or the manufacturer’s customer service. Dispose of old cables or plugs

immediately after replacing them with new ones. It is dangerous to connect the plug of a loose

cable to a socket.

Using extension cables

Only use an approved extension cable suitable for the power input of the machine. The

minimum conductor size is 1.5 mm2. When using a cable reel always unwind the reel

completely.

Dust collection

Fig. 2

The sander has been carried out with a dust bag (3) to keep the working surface clean. The dust

bag must be installed on the back side of the machine, on the opening. It is necessary to empty

the dust bag regularly for an efficient use.

Empty it as follows:

• Turn the dust bag slightly and pull it out of the machine’s adapter.

• Empty the dust bag in a suitable place.

• Push the dust bag on to the machine’s adapter till it locks into place.

Remember that the dust extraction only works when using perforated sandpaper.

Replacing worn sanding paper (ø125mm)

Fig. 3

Before assembly sanding paper always remove the plug from the mains.

3. ASSEMBLY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm ESM1008 - FROS-450 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm ESM1008 - FROS-450 Manual

Product: