Manual Ferm EFM1001 (page 5 of 108) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510109

Zoom out

Zoom in

1/108

Ferm

Indicates the presence of an electrical

voltage.

Wear safety goggles.

Wear hearing protection.



Hold the machine by the insulated gripping

surfaces where the accessory may contact hidden

wiring or the mains cable. If the accessory

contacts a ‘live’ wire, the exposed metal parts of

the machine can also become ‘live’. Risk of

electric shock.

• If you are working with the sanding machine,

wear always ear protectors and dust mask.

• The sanding machine is not suitable for wet

sanding.

• Check if the switch is not in position “ON”,

before you connect the mains plug to the

mains voltage.

• Keep the mains lead always away from

moving parts of the tools.

• Use safety glasses, especially when you sand

above your head.

• Do not bring pressure to your machine, this

will only delay the sanding.

Contact or inhalation of dust coming free

during sanding (e.g. lead painted

surfaces, woods and metals), can

endanger the health of operator and

bystanders. Always wear appropriate

personal equipment as a dust mask and

use the dust bag during sanding.



• Excessive sparking of the carbon brushes and

verticiliosis in the collector.

• Interruption of the mains plug, mains lead or

mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation



When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double

insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs when

they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in the

wall outlet.

Using extension cables

Only use an approved extension cable suitable for

the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.



Always observe the safety instructions

and applicable regulations.

Choice of the sand-paper

Coarse sand-paper (grain 40) removes in general

the bigger part of the material and fine sand-paper

is used for the finishing. If the surface is not even,

then start with rough sand-paper. Further you use

middle coarse sand-paper(grain 80) to remove the

scratches left behind by the coarse sand-paper

and finally you take fine sand-paper (grain 120) for

the finishing.

Before assembly the sanding belt

always remove the plug from the mains.



Fig. B + C

Removing the sanding arm

• Move the belt tensioning lever (5) to the B

position.

• Loosen and remove the belt tracking knob (6).

Caution! Be careful not to lose the spring.

• Remove the spring (11).

• Remove the sanding arm (4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm EFM1001 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm EFM1001 Manual

Product: