763696

Ferm CSM1045 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
10
EN
• If the fuel overflows the engine must not be
started. It is necessary to clean the unit. Under
no circumstances should the unit be started
until the petrol vapours have dispersed.
• Move the chain saw at least 3 m from the
fuelling point before starting the engine.
Exhaust pipe and parts close to it may be
very hot - danger of burning.
Never run the internal combustion
engine inside a closed room -
intoxication risk!
For security reasons always replace the fuel tank
and its cap if damaged.
Oil for Saw Chains
To lubricate the saw chain and guide bar, use only
ecological, biologically degradable quality oil for
saw chains and eventually oil for saw chains on
the basis of mineral oils (ISO VG 100).
Never use oil that has already been used!
Already used oil does not sufficiently
lubricate the chain and in addition can
harm the environment.
Danger of kickback
When working with the chain saw, there can
appear to be a kickback. This kickback can be
caused when the top ending of the guide bar
touches the wood or any other solid object. At this
moment, the chain saw ceases to be controllable
and it is kick backed with a high velocity in the
direction of the user. This can cause severe injury.
Danger of kickback. Kickback can cause
fatal injury.
To avoid kickbacks, follow these instructions:
• Hold the chainsaw firmly in both hands
• Start cutting when the unit is already running -
cut only at full performance.
• Never cut using the top of the guide bar.
• Always watch the end of the guide bar.
• Never use the chainsaw with your arms
stretched.
• Never cut while on a ladder or above shoulder
level.
• Be careful when proceeding with the already
started cut.
• Never work too much when leaning forwards.
• Never cut more than one branch at a time.
• Always work with the correctly sharpened and
tight saw chain.
• Remove the chainsaw from the cut only when
the saw chain is running.
2. MACHINE INFORMATION
Intended use
This chainsaw is designed for infrequent use by
homeowners or gardeners and is intended for
such general applications as:
• Clearing;
• Pruning;
• Cutting firewood.
It is not intended for professional (industrial) use.
Due to vibration, prolonged periods of operation
may cause circulatory or nerve problems in the
user’s fingers, hands and joints of hands. There
may appear prickling of body parts, itching,
twinge, pains, and skin changes. In this case,
medical examination is recommended.
Technical specifications
Model No. CSM1045
Engine type Air-cooled, 2-stroke
Engine displacement 61.5 cm3
Maximum engine power 2.4kw
Max. Engine speed 10000min-1
Engine idling speed Max.3000 min-1 ±300
Maximum chain speed 21 m/s
Chain pitch 0.325” (0,83 cm)
Chain gauge 0.058” (0,15 cm)
Sprocket 6 Teeth x 9.525mm
Volume of fuel tank 460ml
Volume of oil tank 260ml
Length - guide bar 20” (50cm)
Usable cutting length 45cm
Fuel consumption ca. 1200 g/kWh
Spark plug model L7T
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1045 in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info