Manual Ferm CSM1045 (page 9 of 28) (English)

763696

Zoom out

Zoom in

1/28

ADDITIONAL SAFETY INSTRUCTIONS

User

Children and teenagers under the age of 16 must

not use the unit along with any persons who are

not familiar with the operating instructions with

the exception of apprentices older than 16 years

under skilled supervision. Persons under the

influence of alcohol, drugs or medicine as well as

persons who are not familiar with the operating

instructions must not use the unit.

Personal Protective Equipment

To avoid any injury to the head or to extremities,

as well as any damage to hearing, it is necessary

to wear the recommended clothing and protective

equipment. Clothing must be close fitting and

must not limit your movement. If you have long

hair, wear a hairnet.

Personal protective equipment includes:

• Protective helmet,

• Hearing defenders (e.g. protective earflaps),

• Protective glasses or a face protector on a

protective helmet,

• Protective trousers with the protective filling in

the crotch,

• Firm work gloves,

• Safety shoes with non-slip soles and steel toe

caps.

Working area

There must not be any other persons in the

operating area. Also beware of children and of

animals. The user of the unit is responsible for

any accidents caused to other persons and/or

damage to their property. Remove all cut off parts

and other objects - danger of tripping.

Operating

• Operate the unit only after its complete

assembly.

• Inspect the unit’s appearance before operating

it. The unit must be in a safe working condition.

• Immediately replace any parts that are cracked

or chipped.

• Operate the unit only in the technical condition

authorized by the producer.

• Never remove any safety and protective

devices of the unit.

• Always keep the unit in a safe condition.

• Before you start any work, replace any

possible foreign objects from the cut object,

which will avoid kickbacks.

• Always hold the chain saw in both hands -

hold the rear handle with the right hand, the

front handle with the left hand. Never use the

chain saw above shoulder level, because the

handling is not safe on this level.

• Keep the handles dry, clean and free of oil or

fuel mixture.

• Always carry and move the chainsaw with the

chain stopped.

• When transporting your chainsaw, make sure

the appropriate guide bar cover is in place and

the engine is stopped.

• Always carry the chainsaw by the rear handle

with the muffler away from your body directed

to the back.

• During all maintenance work, such as saw

chain replacement or transport of the unit,

always stop the engine.

• If you do not use the unit, always cover the

saw chain with the guide bar cover.

To operate a chainsaw for woodcutting

of trees and cutting of branches requires

extensive experience - operate the unit

only with the assistance of professionally

skilled staff.

Operating time lines

Observe the operating time lines according to

the lawn mowing regulations (noise protection)

specific for all countries. Always use the unit in

daylight or in good artificial light.

Propellants / oil for saw chains

Propellants and oil for saw chains must be

carried and stored only in containers allowed and

indicated for such purpose.

Petrol is highly flammable!

• Add fuel outdoors only. Do not smoke when

refuelling! Never open the cap of the fuel tank,

or add fuel, while the engine is running or the

unit is hot.

• Always use a funnel or a filling pipe for adding

fuel to avoid spilling the fuel onto the engine,

the cover or the ground.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1045 in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CSM1045 Manual

Product: