762265
12
Zoom out
Zoom in
Previous page
1/140
Next page
12
EN
Ceramic tiles and slate
Use a suitable blade. It is necessary to use
dust extraction, because the dust which
is created can hinder the movement of the
protective cover.
Place protective tape or PVC tape on the base
plate or on the object to be sawn. This makes
it easier to saw and protects the tiles against
becoming scratched.
Practice sawing wood before trying
something more complicated, such as
metal or some types of plastic. More
force is required to hold the object to be
sawn and you may sometimes have to
use clamps to keep the object in place.
Dust extraction
Fig. 1
The Precision Circular Saw is a powerful saw. A
lot of dust will be produced when sawing. Since
the blade is fully enclosed, it is necessary to
extract the dust.
A vacuum cleaner can be attached to the saw’s
dust extraction pipe (8) using the dust adapter
included with the machine.
Make sure the vacuum cleaner is suitable for
use with an electrical machine. In general,
household water and dust vacuum cleaners
are suitable.
It is recommended to use dust extraction when
a lot of sawing is to carried out, because less
breaks will then be required to clean the saw
and the surroundings.
It is necessary to extract the dust when sawing
dangerous materials, such as hardwood, MDF
and ceramics.
It is recommended to extract dust if you wish
to keep the work area clean.
It is necessary to extract the dust if the
material to be sawn is damp.
5. MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Maintenance
Machines are designed to function without
problems for a long time with a minimum of
maintenance. Cleaning the saw regularly and
handling it properly will help extend its lifespan.
Cleaning
For safety reasons, the saw must be cleaned
regularly. A build-up of dust can affect the
operation of the saw.
Remove the plug from the plug socket.
Remove the protective cover and clean it
thoroughly using a soft brush, such as a paint
brush.
Clean the housing regularly with a soft cloth,
preferably each time after use. Make sure that
the ventilation holes are free of dust and dirt.
Use a damp soft cloth to remove stubborn dirt.
Do not use any solvents such as petrol, alcohol
or ammonia, etc. These types of substances
damage the plastic parts.
Lubrication
The device does not need any additional
lubrication.
Defects
If a defect appears due to a part wearing out,
please contact the service center on the warranty
card. At the end of these instructions there is
an exhaustive overview of the parts that can be
ordered.
ENVIRONMENT
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Damaged and/or disposed of electrical or
electronic devices must be dropped off at
recycling stations intended for that
purpose.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1043 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1043 in the language / languages: All languages as an attachment in your email.

The manual is 8,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info