763360
15
Zoom out
Zoom in
Previous page
1/64
Next page
Ferm 15
Lubrication
If it is difficult to rotate the adjustment knob, unscrew it until the rubber seal becomes visible.
Use a soft brush to clean the area around the seal and apply a few drops of synthetic oil to it.
Faults
Contact the maintenance address stated on the warranty card if the saw becomes faulty, for
example, in the case of wear of one of the parts. An exploded view included at the back of this
instruction manual lists the parts you can order.
Environment
In order to avoid damage during transport, the saw is delivered in strong packaging material.
Where possible, recyclable packaging material has been used. Therefore, please recycle the
packaging material.
Faulty and/or discarded electrical or electronic tools should be handed over to a
recognized collection point for disposal.
Warranty
See the warranty card in the back of this instruction manual for the warranty terms.
CE DECLARATION OF CONFORMITY (GB)
We declare under our sole responsibility that
KES-350
is in conformity with the following standards or standardized documents:
EN60745-1, EN60745-2-5, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
in accordance with the regulations.
98/37/EC, 2006/95/EC, 89/336/EEC, 2002/95/EC, 2002/96/EC
from 01-08-2007
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
It is our policy to continuously improve our products and we therefore reserve the right to
change the product specification without prior notice.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
GB
D
NL
F
E
P
I
S
FIN
N
DK
114 Ferm
PRÆCISIONSCIRKELSAV
Numrene i den nedenstående tekst henviser til illustrationerne på side 2 - 5.
For din egen og andres sikkerhed anbefaler vi at du læser denne brugsanvisning
nøje igennem, før maskinen tages i brug. Opbevar denne brugsanvisning og den
øvrige dokumentation ved maskinen.
IIndledning
Denne maskine er beregnet til privat brug og til at save i forskellige slags tynde materialer.
Præcisionscirkelsaven kan bruges, hvis der skal saves præcist og støvfrit eller hvis der er risiko
for at ramme rør eller kabler. Præcisionscirkelsaven er unik, fordi det materiale, der skal saves
med maskinen bliver klemt fast mellem basispladen og arbejdsbænken. Derefter bliver
savklingen trykket ned i det materiale, der skal saves, hvorved man får et hurtigt, nemt og pænt
resultat.
Indhold
1. Maskindata
2. Sikkerhedsinstruktioner
3. Anvendelse
4. Service og vedligeholdelse
1. MASKINDATA
Tekniske specifikationer
Spænding | 230 V~50 Hz
Effekt | 350 W
Savdybde | 0-12 mm
Omdrejningstal, uden belastning | 4000 omdr. pr. minut
Maks. driftscyklus | 3 min/5 min
Reduktion | 8.4:1
Savklinge diameter | 50,8 mm
Vægt | 1,2 kg
Maks. klingediameter | 50,8 mm
Maks./min. klingebredde | 2 mm/ 0,75 mm
Rystefrekvens | < 2,5 m/s2
Lydtrykniveau | 86,1 dB(A)
Lydtrykniveau-ækvivalent | 99,1 dB(A)
GB
D
NL
F
E
P
I
S
FIN
N
DK
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CSM1021 - KES-350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1021 - KES-350 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info