Manual Ferm CSM1021 - KES-350 (page 14 of 64) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763360

Zoom out

Zoom in

1/64

Ferm 115

Savspecifikationer

Overskræringmargins

Fig. 1

Dybdeindstilling 1 mm 2 mm 3 mm 4 mm 6 mm 9 mm 12 mm

Overskæring af 3 mm 5,5 mm 7,5 mm 9 mm 11,5 mm 14,5 mm 16,5 mm

Produktinformation

1. Beskyttelseskappe

2. Dækplade

3. Justeringsknap savdybde

4. Tænd/sluk knap

5. Håndtag

6. Ventilationsåbninger bag

7. Ventilationsåbninger for

8. Støvudsugning

9. Afstandsangivelse

10. Udløserknap beskyttelseskappe

11. Savklinge

Pakkens indhold

1Universel og holdbar 18TCT savklinge til træ og plastik

1 Diamantsavklinge G50 til keramik

1 Savklinge 44HSS fin til træ og plastik

1 Savklinge 60HSS til aluminium og meget fine træ- og plastiksorter

1Støvudsugningsslange

2 Sekskantnøgle

1 Sikkerhedsinstruktioner

1 Brugsanvisning

1 Garantikort

2. SIKKERHEDSINSTRUKTIONER

Symbolforklaring

CE overensstemmelse med de anvendte europæiske standarder på

sikkerhedsområdet.

Klasse II apparat – dobbeltisoleret – stikket behøver ikke være jordforbundet.

Træ | Alle sorter indtil 12 mm

Metal | Indtil 3 mm i aluminium og bly

Kompositter | MDF, spånplade indtil 12 mm

Plastik | tufnol, perspex, fiberglas, osv.

Mineraler | gulv- og vægfliser, skifer, osv.

FIN

14 Ferm

Plasterboard

• As an exception, the saw may be used to cut plasterboard, but only with suitable dust

extraction. Dust can hinder the movement of the protective cover.

N.B.: Practice sawing wood before trying something more complicated, such as metal or some

types of plastic. More force is required to hold the object to be sawn and you may sometimes

have to use clamps to keep the object in place.

Dust extraction

The Precision Circular Saw is a powerful saw. Alot of dust will be produced when sawing. Since

the blade is fully enclosed, it is necessary to extract the dust.

• An industrial vacuum cleaner or a household vacuum cleaner can be attached to the saw’s

dust extraction pipe with the aid of a dust extraction kit.

• Before use, make sure the hose fits exactly onto the metal clip.

• Remove the plug from the socket before connecting the hose. Push the hose with the metal

clip onto the dust extraction pipe as far as the lath on the saw. Make sure the protective

cover can still move freely. If necessary, use tape to secure the hose in position.

• Make sure the vacuum cleaner is suitable for use with an electrical machine. In general,

household water and dust vacuum cleaners are suitable.

• It is recommended to use dust extraction when a lot of sawing is to carried out, because

less breaks will then be required to clean the saw and the surroundings.

• It is necessary to extract the dust when sawing dangerous materials, such as hardwood,

MDF and ceramics.

• It is recommended to extract dust if you wish to keep the work area clean.

• It is necessary to extract the dust if the material to be sawn is damp.

4. SERVICE & MAINTENANCE

Remove the plug from the plug socket immediately if the cable becomes damaged.

Also remove the plug during maintenance work.

Maintenance

Machines are designed to function without problems for a long time with a minimum of

maintenance. Cleaning the saw regularly and handling it properly will help extend its lifespan.

Cleaning

For safety reasons, the saw must be cleaned regularly. Abuild-up of dust can affect the

operation of the saw.

• Remove the plug from the plug socket.

• Remove the protective cover and clean it thoroughly using a soft brush, such as a paint brush.

• Clean the housing regularly with a soft cloth, preferably each time after use. Make sure that

the ventilation holes are free of dust and dirt. Use a damp soft cloth to remove stubborn dirt.

Do not use any solvents such as petrol, alcohol or ammonia, etc. These types of

substances damage the plastic parts.

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CSM1021 - KES-350 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CSM1021 - KES-350 Manual

Product: