Manual Ferm CRM1044 (page 6 of 64) (English, German, Dutch, French, Polish)

632692

Zoom out

Zoom in

1/64

pressurised.

• N.B.:somepartsofthecompressorsuchas

the head and the feed-through pipes may

reach high temperatures. Do not touch these

parts to avoid burns (fig. 12-13).

• Transportthecompressorbyliftingitorby

using the special grips or handles (fig. 5-6).

• Childrenandanimalsshouldbekeptfaraway

from the area of operation of the machine.

• Ifyouusethecompressortospraypaint:

a) Do not work in enclosed spaces or near naked

flames.

b) Make sure that the environment in which you

will be working has dedicated ventilation.

c) Protect your nose and mouth with a dedicated

mask (fig. 21).

• Donotusethecompressorwhentheelectrical

cableortheplugisdamaged,andinstructan

authorised Support Service to replace them

with an original part.

• Whenthecompressorisplacedonasurface

higherthanthefloor,itshouldbesecuredto

prevent it from falling down during operation.

• Donotputobjectsoryourhandsinthe

protective covers to avoid physical damage

and damage to the compressor.

• Donotusethecompressorasablunt

instrumentagainstpersons,objectsoranimals

in order to prevent serious damage.

• Ifthecompressorisnolongerinuse,always

take the plug out of the plug socket.

• Alwaysmakesurethatcompressed-air

hoses are used for compressed air and which

are characterised by a maximum pressure

adjustedtothatofthecompressor.Donottry

to repair the hose if it is damaged.

Electrical safety

Earthing regulations

This compressor has to be earthed while in use

in order to protect the operator against electrical

shocks. The compressor is provided with a two-

core cable plus an earth. The electrical connection

hastobemadebyaqualifiedtechnician.We

recommend never disassembling the compressor

and neither making any other connections into

the pressure regulator. Repairs should be carried

out by authorised Support Services or by other

qualified centres.

Never forget that the earthing core is the

green or the yellow/green wire. Never

connect this green wire to a terminal

under load.

Beforereplacingtheplugofthefeed,makesure

thattheearthcableisconnected.Ifindoubt,

please call in a qualified electrician and have the

earthing checked.

Power supply

• Thecompressorisequippedwithamains

cable with shock-proof plug. This can be

connected to any 230V~/50Hz shock proof

socket which is protected by a 16A fuse.

• Themotorisfittedwithanoverloadswitch

(15).Ifthecompressoroverloads,the

overload switch switches the equipment off

automatically to protect the compressor from

overheating.Iftheoverloadswitchtriggers,

switchoffthecompressorusingtheON/OFF

switch (3) and wait until the compressor cools

down. Then press the overload switch (15) and

restart the compressor.

• Longsupplycables,extensions,cablereelsetc

cause a drop in voltage and can impede motor

start-up. Do not use cables longer than 10m.

Fermadvisestousealongerairhoseinstead.

• Itcanbemoredifficulttostart-upthemotor

during conditions of temperatures below 0C.

3. USE

For household use only

NB:Theinformationyouwillfindinthismanual

has been written to assist the operator in the

use and maintenance of the compressor. Some

illustrations in this manual show details which

may differ from those of your compressor.

Installation

After having taken the compressor out of its

packaging (fig. 1) and having checked that it is

inperfectcondition,andhavingnotedthatno

damageoccurredduringtransport,thefollowing

actsshouldbeperformed.Ifnotyetfitted,fitthe

rubber feet and the wheels on the tank according

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1044 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CRM1044 Manual

Product: