Manual Ferm CRM1026 FCO-2050 (page 5 of 48) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

538646

Zoom out

Zoom in

1/48

Ferm 05

11. Air filter

12. Oil cap

13. Sump

14. Drain cock

2.SAFETY INSTRUCTIONS

Explanation of symbols

The following symbols are used in these instructions for use:

Read the instructions.

In accordance with essential applicable safety standards of European directives.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Risk of electric shock.

Remove the plug from the mains

Attention: the compressor could start automatically in case of a black-out and

subsequent reset

Caution: the compressor contains some parts wich might reach high temperatures

Wear ear protection.

Sound power level

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Special safety instructions

• For proper operation of the machine with a full continuous load under maximum operating

pressure, please make sure that the temperature of the working environment in an

enclosed area is not more than +25°C.

• It is recommended to use the compressor with a maximum operation of 70% in one hour

under full load, to allow for proper operation of the product over time.

FIN

92 Ferm

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CRM1026 FCO-2050 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CRM1026 FCO-2050 Manual

Product: