763855
5
Zoom out
Zoom in
Previous page
1/124
Next page
5
EN
c) Apply pressure only in direct line with the bit
and do not apply excessive pressure. Bits
can bend causing breakage or loss of control,
resulting in personal injury.
Safety warnings for battery
a) Do not open the battery. Danger of
shortcircuiting.
b) Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
c) In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
d)
Use the battery only in conjunction with your
Ferm Industrial product. This measure alone
protects the battery against dangerous overload.
e) The battery can be damaged by pointed
objects such as nails or screwdrivers or by
force applied externally. An internal short
circuit can occur and the battery can burn,
smoke, explode or overheat.
Safety warnings for charger
Intended use
Charge only CDA1132P and CDA1133P type
rechargeable Battery packs with the charger.
Only use the following batteries of the Ferm
Industrial FI20V battery platform. Using any other
batteries could cause serious injury or damage
the tool.
CDA1132P 20V, 2Ah Lithium-Ion
CDA1133P 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1131P Quick charger
The batteries of the Ferm Industrial FI20V battery
platform are interchangeable with all the Ferm
Industrial FI20V battery platform tools.
Residual risks
Even when the power tool is used as
prescribed it is not possible to eliminate all
residual risk factors. The following hazards
may arise in connection with the power tool’s
construction and design:
a) Health defects resulting from vibration
emission if the power tool is being used
over longer period of time or not adequately
managed and properly maintained.
b) Injuries and damage to property to due to
broken accessories that are suddenly dashed.
Warning! This power tool produces an
electromagnetic field during operation.
This field may under some circumstances
interfere with active or passive medical
implants. To reduce the risk of serious or
fatal injury, we recommend persons with
medical implants to consult their physician
and the medical implant manufacturer
before operating this power tool.
Power cord replacement
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
2. MACHINE INFORMATION
Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
Technical specifications
Machine CDM1141P
Voltage 20V
Chuck capacity 1.5-13mm
No load speed
Position 1:
Position 2: 0-450/min
0-1700/min
Max torque 50 Nm
Torque settings 21 + drill mode
Weight (without battery pack) 1.24 kg
Sound pressure level LpA 92 dB(A), K=3dB(A)
Sound power level LwA 103 dB(A), K=3dB(A)
Vibration 2.93 m/s2 K=1.5 m/s2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CDM1141P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1141P in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info