763851
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
EN
2. MACHINE INFORMATION
Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.
Technical specifications
Model No CDM1133
Charger CDA1104
Input of charger 230-240V~ 50Hz
50W
Output of charger 16.8V DC 1.8A
Rechargeable battery pack 16 V Li-ion 1.5Ah
Battery charging time 60 minutes
Chuck capacity 1.0 - 10 mm
Torque settings 17 + Drill mode
No load speed
Position 1:
Position 2:
0-400 /min
0-1500 /min
Weight (incl. battery) 1.15 kg
Sound pressure level LPA 85 dB(A), K=3dB(A)
Sound power level LWA 96 dB(A), K=3dB(A)
Hand-arm vibration ah
(screwdriving without impact) 1.027 m/s2 K=1.5 m/s2
Hand-arm vibration ah,D
(Drilling into metal) 1.811 m/s2 K=1.5 m/s2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• Usingthetoolfordifferentapplications,orwith
different or poorly maintained accessories,
may significantly increase the exposure level.
• Thetimeswhenthetoolisswitchedoffor
when it is running but not actually doing the
job, may significantly reduce the exposure
level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
pages 2 - 3
Fig. A
1. Machine
2. Battery
3. Battery unlock button
5. Charger
6. Charger LED indicators
7. Chuck
8. Gear selection switch
9. Direction switch
10. On / off switch
11. Torque adjustment ring
12. Work light
3. OPERATING
The battery must be charged before first
use.
Removing the battery from the machine
Fig. B1 + B2
• Pushthebatteryunlockbuttons(3)andpull
the battery out of the machine like shown in
Fig. B1.
Inserting the battery into the machine
Fig. B1 + B2
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
• Insertthebattery(2)intothebaseofthe
machine as shown in Fig. B2.
• Pushthebatteryfurtherforwarduntilitclicks
into place.
Charging the battery (with the charger)
Fig. C
• Slidethebatteryintothechargerasshownin
Fig.C.TheLEDindicatoronthecharger(6)will
lighten up and show the charger status.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CDM1133 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1133 in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info