Manual Ferm CDM1112S (page 9 of 152) (All languages)

632674

Zoom out

Zoom in

1/152

 

activating the machine´s on/off switch.

Adjusting the gears

Fig. F

Never switch gears when the motor is

running, this will damage your machine.

Never put switch in the middle between

both positions, this will damage your

machine.

The machine has 2 drill speeds, which can be





shows which position is chosen.

 

diameter or screw driving. The machine has

high power at a low speed.

 

diameter

Adjusting the direction of rotation

Fig. G

  in

order to drive screws or to use it for drilling.

  in

order to remove screws.

Switching the machine on and off

Fig. G



machine and adjusting rotation speed.

 

the machine, the further the switch is being

pushed, the faster the drill will turn.

 

machine.

 

middle position to lock the movement of the

on/off switch. It cannot be activated in this

position.

Only lay down the machine when it has

stopped running completely. Do not

place it on a dusty surface as particles of

dust could get into the mechanism.

Adjusting the torque

Fig. G

The machine has 20 different torque settings

and a special drill mode to set the power being

transmitted to the chuck.



screws can be driven to a predetermined depth,

which is ideal for repetitive work. The higher the

number, the more torque will be transmitted.

 

work material.

 

work materials and when removing screws.

 

low as possible when driving screws. Select

a higher setting if the motor slips before the

screw is fully tightened.

 



) by fully turning it

counterclockwise.

Ensure that the direction switch (9) is

always set to during drilling.

The machine is equipped with electronic

overload protection function. When the

machine gets overloaded it will shut

down automatically. When this happens,

please wait for a few seconds to let the

overload protection reset itself.

Work light (12)

Fig. A

The machine is equipped with a work light to

illuminate the work location.

 

switch is being pressed.

 

switch is released again.

Belt hook (13)

Fig. A

The machine is equipped with a belt hook for

hanging the machine to your belt during use.

Always switch the direction switch (9) to

middle position to avoid accidental

startup of the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1112S in the language / languages: All languages as an attachment in your email.

The manual is 23,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1112S Manual

Product: