632674

Ferm CDM1112S Manual

8
Zoom out
Zoom in
Previous page
1/152
Next page
8
EN
Inserting the battery into the machine
Fig. B
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
 
 
machine as shown in Fig. B.
 
into place.
Checking the battery charging status
Fig. C
The included battery is delivered in partly
charged condition.
 
the battery into the machine.
 

 
the charge level, the more lights that burn, the
more charge the battery has left.
 
the battery is empty and must be charged
immediately.
Charging the battery (with the charger)
Fig. D
 
 

 
slot.
 
and wait for a while. The LED indicator on

charger status.
LED indicator (6)
Fig.D

indicates the status of the charging process:
LED color LED status Charger status
Off Off No power or no battery is inserted
Green Blinking Battery charging in progress
Green On
Battery charging finished, battery
fully charged
Red Blinking
The battery is not inserted correctly
into the charger or, the battery is
defective and needs to be replaced
Red On
Battery is too hot, charging
progress is on hold. Charging will
start automatically after the battery
has cooled down.
 
to 45 minutes.
 
charger plug from the outlet and remove the
battery from the charger.
 
on the machine.
Lithium-Ion cells can be stored for a long
period without losing much of their
charge. When the machine is not being
used over a longer period of time it is
best to store the battery in charged
condition.
Fitting and removing drills or screwdriver bits
Fig. E
Always remove the battery before
mounting an accessory.

screwdriver bits with round shaft as well as
hexagonal shaft.
 
 
with your other hand in clockwise direction
until it is opened far enough for the bit to slide
in.
 
 

… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm CDM1112S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1112S in the language / languages: All languages as an attachment in your email.

The manual is 23,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info