Manual Ferm CDM1035 - FDC-2400lN (page 6 of 50) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763639

Zoom out

Zoom in

1/50

Ferm 95

06 Ferm

Never throw batteries into open fire

In case of failure, the transformer is not dangerous

Thermic protector

Faulty and/or discarded electrical or electronic apparatus have to be collected at

the appropriate recycling locations.

Important safety advice concerning the battery pack & battery charger

If you should come into contact with any acid from the Battery pack, wash the affected parts

with water immediately. If acid should come into contact with the eyes, rinse them

immediately with water and seek medical advice as soon as possible.

1. Before using both the battery pack and the battery charger, make sure you have read and

understood the operating instructions and safety information.

2. Only use the battery pack with the battery charger provided – using other chargers could

be dangerous.

3. Keep the battery pack, tool and battery charger away from damp and wet conditions.

4. Before using the battery charger, check all wires are properly connected.

5. If any wires on the charger are damaged, do not use it until these have been replaced.

6. When the charger is not in use it should not be plugged in. When unplugging, do not pull

the plug out by the cable.

7. If the charger breaks down or suffers from other technical problems, take it to a

recognised dealership to be checked before using it again. Any damaged parts must be

replaced.

8. Take care when handling the battery pack, do not drop it or knock it against other things.

9. Never attempt to repair the battery charger or battery pack yourself; this can be extremely

dangerous. Repairs should always be carried out by a recognised dealership.

10. Always unplug the charger before cleaning or carrying out any other maintenance on it.

11. Do not attempt to charge the battery pack in temperatures of below 10 degrees or above

40 degrees centigrade.

12. The air vents on the battery charger must be kept unblocked.

13. The battery pack must not be short-circuited.

When an apparatus short-circuits, the strength of the electric current is increased.

This can cause the apparatus to over heat, catch fire or even explode, causing

damage and also endangering the operator.

To avoid this:

• Firstly do not connect any wires to the terminals of the battery pack;

• Ensure that no metal objects (nails, coins, paper-clips) are caught in the opening of the

battery pack;

• Do not expose the battery pack to water or rain.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm CDM1035 - FDC-2400lN in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm CDM1035 - FDC-2400lN Manual

Product: