Manual Ferm BSM1022 - EBF-950 (page 5 of 92) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763848

Zoom out

Zoom in

1/92

Mains plug replacement (UK only)

If the moulded 3-pin plug attached to the unit is

damaged and needs replacing, it is important that

it is correctly destroyed and replaced by an

approved BS 1363/5A fused plug and that the

following wiring instructions are followed.

The wires in the mains cable are coloured in

accordance with the following code:

blue neutral

brown live

As the colours of the wires in the mains cable of

the unit may not correspond to the coloured

markings identifying the terminals in the plug,

proceed as follows:

- The wire which is coloured blue must be

connected to the terminal which is marked with

the letter N or coloured black.

- The wire which is coloured brown must be

connected to the terminal which is marked with

the letter L or coloured red.

TECHNICAL DATA

BSM1022

Mains voltage V~ 230

Mains frequency Hz 50

Power input W 950

No-load speed min-1 400

Sanding belt size mm 75 x 533

Sanding pad size mm 76 x 135

Protection class IP 20

Weight kg 3.65

NOISE AND VIBRATION

BSM1022

Sound pressure (Lpa) dB(A) 92

Acoustic power (Lwa) dB(A) 106

Uncertainty (K) dB(A) 3

Vibration (main grip) m/s2 1.90

Vibration (auxiliary grip) m/s2 2.4

Uncertainty (K) m/s2 1.5

Wear hearing protection.

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in EN

60745; it may be used to compare one tool with

another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

- using the tool for different applications, or with

different or poorly maintainted accessories,

may signicantly increase the exposure level

- the times when the tool is switched off or when

it is running but not actually doing the job, may

signi cantly reduce the exposure level

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

DESCRIPTION (FIG. A)

Your belt sander has been designed for rough

sanding applications on wood, metal, plastics and

painted surfaces.

1. On/off switch

2. Lock-on button

3. Sanding pad

4. Sanding belt roller

5. Clamping lever for sanding belt

6. Centring knob for sanding belt

7. Main grip

8. Auxiliary grip

9. Dustbag connection

10. Carbon brush holder

11. V-belt cover

ASSEMBLY

3 Before assembly, always switch off the

machine and remove the mains plug

from the mains.

Mounting and removing the sanding belt



Mounting

● Place the machine on its side with the V-belt

cover (11) facing downwards.

● Release the clamping lever (5).

● Mount a sanding belt (12) with the required

grain size around the sanding pad (3) and the

sanding belt rollers (4). Make sure that the arrow

on the inside of the sanding belt points in the

same direction as the arrow on the housing.

- Use a coarse sanding belt (grain 50) for

sanding rough, uneven surfaces.

- Use a medium sanding belt (grain 80) for

removing the remaining scratches from the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BSM1022 - EBF-950 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BSM1022 - EBF-950 Manual

Product: