BAND SAW
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
CONTENTS
1. Machine data
2. Safety instructions
3. Installation
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL SPECIFICATION
PRODUCT INFORMATION
Fig. 1
1. Base
2. On/off switch
3. Saw blade
4. Saw blade guard
5. Blade guide adjusting knob
6. Frame
7. Blade tension knob
8. Adjustment knob
9. Sawdust outlet
10. Blade guides
11. Table
12. Table tilt groove
13. Graduated scale
14. Pointer
15. Table locking knob
2. SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply corresponds to
the voltage on the rating plate.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
Only use an approved extension cable suitable for the
power input of the machine. The minimum conductor
size is 1.5 mm
2
. When using a cable reel always unwind
the reel completely.
BEFORE USING THE MACHINE:
• Make sure:
• The voltage of the machine corresponds to the mains
voltage.
• To use an earthed power source (wall socket).
• The cord and the plug are in good condition, i.e. not
frayed or damaged.
• No saw teeth are missing and the blade is not crack-
ed or split. Otherwise replace immediately.
Voltage | 230 V~
Frequency | 50 Hz
Power input | 350 W
No load speed | 1300/min
Max. saw capacity 90
o
| 85 mm
Max. saw capacity 45
o
| 42 mm
Table dimensions | 300x300mm
Lpa (sound pressure) | 76,8 dB(A)
Lwa (acoustic power) | 87,56 dB(A)
Vibration | 5,0 m/s
2
4 Ferm Ferm 65
