Manual Ferm BSM1005 - FBS-1000N (page 3 of 20) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763824

Zoom out

Zoom in

1/20

38 Ferm

SPARE PARTS LIST FBS-1000N

REF NR DESCRIPTION FERM NR

3 GEAR SHAFT 409214

13 SWITCH 409215

21 GEAR, BIG 409216

27 CARBON BRUSH (SET) 409217

28 COVER BRUSH HOLDER 409218

29 TILL 31 ADJUST KNOB COMPLETE 409219

36 + 38 REAR WHEEL COMPLETE 409220

37 NEEDLE BEARING 409221

51 FRONT WHEEL 409222

56 STATOR 409223

58 ROTOR 409224

64 DUSTBAG 409225

BELT SANDER

THE NUMBERS IN THE FOLLOWING TEXT

REFER TO THE DRAWINGS ON PAGE 2

SAFETY AND OPERATING INSTRUCTIONS

For your own safety and for the safety of others,

please read these instructions carefully before

using this appliance. It will help you understand your product

more easily and avoid unnecessary risks. Keep this instruction

manual in a safe place for future use.

CONTENTS

1. Machine data

2. Safety instructions

3. Operation

4. Maintenance

1. MACHINE DATA

TECHNICAL

SPECIFICATION

PRODUCTINFORMATION

Fig. A

The belt sander is the perfect tool to sand wood and to

grind iron, plastic or similar materials.

The belt sander must be used for the rough work, for the

normal sanding work an orbital sander must be used.

1. On/off switch

2. Front handle

3. Rear handle

4. Blocking switch

5. Dust collection opening

6 Adjusting knob

7. Sanding belt fastener

8. Front belt roller

9. Direction indicator

10. Drive belt cover

11. Dust bag

PACKAGE CONTENTS

1 Belt sander

3 Sanding belts

1 Dust collection bag

1 Instruction manual

1 Safety instructions

1 Guarantee card

Check the machine, loose parts and accessories for

transport damage.

2. SAFETY INSTRUCTIONS

Explanation of symbols

In this manual and/or on the machine the following

symbols are used:

Read instructions carefully

In accordance with essential applicable safety

standards of European directives

Class II machine – Double insulation – You don’t

need any earthed plug.

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual.

Indicates electrical shock hazard.

Immediately unplug the plug from the mains

electricity in the case that the cord gets damaged

and during maintenance

Faulty and/or discarded electrical or electronic

apparatus have to be collected at the appropriate

recycling locations.

ELECTRICAL SAFETY

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply corresponds to

the voltage on the rating plate.

The machine is double insulated in accordance

with EN-50144; therefore no earth wire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs when they

have been replaced by new ones. It is dangerous to insert

the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the

power input of the machine. The minimum conductor

size is 1.5 mm2. When using a cable reel always unwind

the reel completely.

SPECIAL SAFETY PRECAUTIONS

• If you are working with the sanding machine, wear

Voltage | 230 V~

Frequency | 50 Hz

Power input | 1000 W

No load sander paper speed | 320m/min

Sanding belt size | 100x 533 mm

Sanding pad size | 100x 135mm

Weight | 4.8kg

Lpa (Sound pressure) | 93.5dB(A)

Lwa (Sound power level) | 106.5dB(A)

Vibration value | 4.729m/s2

Ferm 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BSM1005 - FBS-1000N in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BSM1005 - FBS-1000N Manual

Product: