763823
9
Zoom out
Zoom in
Previous page
1/42
Next page
Ferm 9
Repairs and servicing should only be carried out by a qualified technician or
service firm.
Cleaning
Regularly clean the device’s casing with a soft cloth, preferably after each use. Keep the
fan slits free of dust and dirt. Remove stubborn dirt using a soft cloth, dampened with
soapy water. Do not use solvents such as benzene, alcohol, ammonia, etc., which might
damage the plastic parts.
Lubrication
The device does not need any additional lubrication.
Defects
If a defect appears due to a part wearing out, please contact the service center on the
warranty card. At the end of these instructions there is an exhaustive overview of the parts
that can be ordered.
Environment
To prevent damage during transport, the appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore please make use of options for recycling
the packaging.
Damaged and/or disposed of electrical or electronic devices must be dropped
off at recycling stations intended for that purpose.
Warranty
Read the warranty conditions on the separately supplied warranty card.
The electromotor gets hot
The connected machine
does not work
The dust is not absorbed
The motor is defect
Interruption in the mains
connection
This can be caused by a
stopped up dust
extraction
Have your belt sander
repaired or checked by
your dealer
Check mains connection
for fracture.
Have your belt sander
repaired or checked by
your dealer
Clean your dust
collection opening
Repairing of electric
appliances may be
carried out only by
experts
D
NL
F
E
P
I
S
FIN
N
DK
Ferm
Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres
på en genbrugsplads.
Særliges sikkerhedsforanstaltninger
Når der arbejdes med båndpudseren, skal der altid bæres høreværn og støvmaske.
Båndpudserenen er ikke beregnet til våd slibning.
Kontroller, at maskinen ikke er blokeret i TÆNDT-position, før stikket sættes i
stikkontakten.
Hold altid ledningen borte fra maskinens bevægelige dele.
Brug beskyttelsesbriller, især hvis der arbejdes over hovedhøjde.
Udøv ikke tryk på maskinen, det gør kun arbejdet sværere.
Støv som dannes under arbejdet kan være skadelig for helbred, let antændelig
eller eksplosiv. Passende sikkerhedsforeskrifter skal opfyldes. Anvend altid
passende sikkerhedsudstyr for eksempel en støvbeskyttelsesmaske og anvend
støvpose.
Maskinen skal øjeblikkeligt slukkes i til fælde af:
Defekt netstik, netledning eller beskadigelse af ledning.
Defekt kontakt.
Gnistdannelse i kullene eller ringild i kollektoren.
Røg eller lugt fra sveden isolering.
Elektrisk sikkerhed
Ved anvendelse af elektriske mas kiner skal man altid følge de lokalt gældende
sikkerhedsforskrifter i forbindelse med brandfare, fare for elektrisk stød og
legemensbeskadigelse. Læs udover de nedenstående instruktioner også sikkerheds-
forskrifterne i den separat vedlagte sikkerhedsfolder.
Kontroller altid om netspændingen svarer til værdien på typeskiltet.
Klasse II maskine – Dobbelt isolering – Du behøver ingen jordforbindelsestik.
Udskiftning af ledninger eller stik
Hvis netledningen er blevet beskadiget, skal den udskiftes med en speciel netledning, som
kan fås via fabrikanten eller fabrikantens kundeservice. Gamle ledninger og stik skal
kasseres, når de er blevet udskiftet med nye. Det er farligt at sætte stikket på en løs
ledning i en stikkontakt.
Ved brug af forlængerledninger
Brug udelukkende godkendte forlæn gerledninger, der er beregnede til maskinens effekt.
Lederne skal have et gennemsnit på mindst 1.5 mm2. Hvis forlængerledningen sidder på
en tromle, rulles ledningen helt af.
76
GB
D
NL
F
E
P
I
S
FIN
N
DK
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BSM1004 - FBS-1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BSM1004 - FBS-1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info