Manual Ferm BSM1004 - FBS-1200 (page 6 of 42) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763823

Zoom out

Zoom in

1/42

Ferm 79

Reparationer må udelukkende udføres af en autoriseret installatør eller et

autoriseret serviceværksted.

Rengøring

Rengør maskinhuset regelmæssigt med en blød klud, fortrinsvist efter hver anvendelse. Hold

blæserristen fri for støv og snavs. Fjern fastsiddende snavs med en blød klud fugtet med

søbevand. Brug ikke opløsningsmidler, som f.eks. benzin, alkohol, ammoniak, osv. Disse

midler kan beskadige plastikdelene.

Smøring

Maskinen behøver ingen ekstra smøring.

Fejl

Skulle en fejl opstå, f.eks. pga. slidtage af en enhed, kontakt venligst serviceadressen på

garantibeviset. På bagsiden af denne manual finder du en tegning med alle dele, der kan bestilles.

Miljø

For at undgå transportbeskadigelse leveres maskinen i en solid emballage. Emballagen er så

vidt muligt lavet af genbrugsmateriale. Genbrug derfor emballagen.

Defekte og/eller kasserede elektriske eller elektroniske maskiner skal afleveres på

en genbrugsplads.

Garanti

Læs det separat vedlagte garantikort for garantibetingelserne.

• Slibemaskinen bliver for

varm

• Støvet suges ikke op

• Slibemaskinen belastes

for meget.

• Dette kan eventuelt

skyldes, at

støvudsugningen er

tilstoppet.

• Brug maskinen til det,

den er beregnet til.

• Motoren er defekt.

Indlever slibemaskinen til

reparation hos Deres

forhandler.

• Rens åbningen til

udsugning af støv.

FIN

Ferm

Faulty and/or discarded electrical or electronic apparatus have to be collected

at the appropriate recycling locations.

Specific safety instructions

• If you are working with the sanding machine, wear always ear protectors and dust

mask.

• The sanding machine is not suitable for wet sanding.

• Check if the switch is not in position “ON”, before you connect the mains plug to the

mains voltage.

• Keep the mains lead always away from moving parts of the tools.

• Use safety glasses, especially when you sand above your head.

• Do not bring pressure to your machine, this will only delay the sanding.

The dust that is produced while working can be detrimental to health,

inflammable or explosive. Suitable safety measures are required. Always wear

suitable safety equipment, for example a dust mask, and use the dust bag.

Immediately switch off the machine when:

• Excessive sparking of the carbon brushes and verticiliosis in the collector.

• Interruption of the mains plug, mains lead or mains lead damage.

• Defect switch

• Smoke or stench of scorched isolation

Electrical safety

When using electric machines always observe the safety regulations applicable in your

country to reduce the risk of fire, electric shock and personal injury. Read the following

safety instructions and also the enclosed safety instructions.

Always check that the power supply corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs when they have been replaced by new ones.

It is dangerous to insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the power input of the machine. The

minimum conductor size is 1.5 mm2. When using a cable reel always unwind the reel

completely.

FIN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BSM1004 - FBS-1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BSM1004 - FBS-1200 Manual

Product: