Manual Ferm BJM1005 - FBJ-900P (page 7 of 54) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

763372

Zoom out

Zoom in

1/54

Ferm

Samling af arbejdsemner

Når fugespalterne i begge arbejdsemner er lavet, kan arbejdsemnerne samles.

• Put lim i begge fugespalter.

• Anbring dyvlen i et af arbejdsemnernes fugespalter.

• Anbring det andet arbejdsemne på dyvlen.

• Fastgør arbejdsemnerne, og vent til limen er tør.

Brugertips ved tilslutning af to arbejdsstykker

Fig. K

• Sav et indsnit, så stor som en lamel, ind i det første arbejdsstykke

• Placér lamellen, godt med lim (alt efter materialet), ind i indsnittet

• Sav et længere indsnit ind i det andet arbejdsstykke

• Nu kan begge arbejdsstykker let placeres mod hinanden (med plads til at korrigere)

• Fastgør arbejdsstykkerne, og vent til limen er tør

Kontrol af fræsedybde

Fig. J

Kontroller altid fræsedybden, efter savklingen er monteret.

• Tag stikket ud af stikkontakten.

• Træk motorhuset (15) så langt tilbage som muligt.

• Indstil fræsedybden på den maksimale position ved at dreje knappen til justering af

fræsedybden (7).

• Flyt motorhuset frem, indtil stiften (A) glider ind i hakket på justeringsknappen.

Drej savklingen, indtil en af savklingens tænder er i forreste position.

• Mål afstanden mellem bundpladens side og savklingens tand.

• Kontroller, at afstanden er 18 mm. Den maksimale position er 18 mm.

Indstilling af fræsedybde

Når fræsedybden ikke er korrekt, kan den justeres på følgende måde.

• Flyt motorhuset (15) så langt tilbage som muligt.

• Løsn stiften (A).

• Indstil fræsedybden ved at dreje på skruen, som er bagved stiften (A).

• Gentag dette, indtil fræsedybden er korrekt.

• Sæt stiften (A) fast.

6. VEDLIGEHOLDELSE

Sørg for at maskinen ikke står under strøm, når der udføres

vedligeholdelsesarbejder på mekanikken.

Maskinerne er udviklet til at fungere længe uden problemer med et minimum af

vedligeholdelse. Ved at rengøre maskinen regelmæssigt og behandle den korrekt, bidrager

De til en længere levetid for maskinen.

102

Ferm 7

1 Guarantee card

Check the machine, loose parts and accessories for transport damage.

Features

Fig.A

The Biscuit Jointer is suitable for cutting grooves for biscuit dowel joints in solid wood,

plywood, chipboard, fibre board, plexiglass and artificial marble.

1. On/off switch

2. Auxiliary handle

3. Spindle lock

4. Angle stop

6. Scale for the fence angle

7. Cutting depth adjustment knob

8. Clamping lever for angle adjustment

9. Clamping lever for height adjustment

10. Knob for height adjustment

11. Scale for the height adjustment

12. Base plate

13. Dust bag connection

14. Dust bag

15. Motor base

16. Arrow (direction of rotation)

2. SAFETY INSTRUCTIONS

The following symbols are used throughout this manual:

Read instructions carefully

In accordance with essential applicable safety standards of European directives

Class II machine – Double insulation – You don’t need any earthed plug.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual.

Indicates electrical shock hazard.

Immediately unplug the plug from the mains electricity in the case that the cord

gets damaged and during maintenance

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BJM1005 - FBJ-900P in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BJM1005 - FBJ-900P Manual

Product: