Manual Ferm BJM1001 (page 9 of 108) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

510089

Zoom out

Zoom in

1/108

• To switch the machine off, depress the on/off

switch, the switch will automatically move to

the ‘off’ position.

Never use the spindle lock to stop the

motor.

Marking the workpieces

Fig. F

Before starting with the Biscuit Jointer the

workpieces must be marked as following.

• Place the two workpieces, which must be

connected, on top of each other.

• Fasten the workpieces and mark the center of

the groove.

• The space between two grooves should be

10-15 cm, this doesn’t concerns for smaller

workpieces. Smaller workpieces don’t have to

be marked.

Positioning of the machine

Based on the size of the workpieces the machine

can be positioned in several ways.

Large workpieces

Fig. G

• Place the machine near the workpiece.

• The middle of the base plate (this point is

marked on the base plate) must facing the

centre of the groove in the workpiece (see

marking the workpiece).

Small workpieces

Fig. H

• Place the machine near the workpiece.

• The side of the machine must be facing the

side of the workpiece.

Workpieces thinner than 16 mm

Fig. I

• Place the machine near the workpiece.

• Place the adjustment plate (5) on the angle

stop (4).

• Take care for setting the height, the groove for

the biscuit dowel must be in the middle of the

workpiece.

For workpieces thinner than 16 mm it is not

possible to make the groove for the biscuit dowel

in the middle of the workpiece without the aid of

the adjustment plate.

Sawing grooves

• Move the motor base backward.

• Place the machine near the workpiece.

• Position the machine (see positioning of the

machine)

• Hold the machine with both hands and switch

the machine on.

• Push the motor base carefully forward as far

as possible.

• Move the motor base backward and switch

the machine off.

Move the machine in the same direction

as the direction of rotation. See arrow

on top of the machine (16).

Joining the workpieces

When the grooves in both workpieces have been

made the workpieces can be joined together.

• Put glue in both grooves.

• Place the biscuit dowel in the groove of one

workpiece.

• Place the other workpiece on the biscuit

dowel.

• Fasten the workpieces and wait till the glue is

dry.

User tip for connecting two workpieces

Fig. K

• Saw a groove as big as one biscuit into the

first workpiece

• Place the biscuit with good glue (according

the material) into the groove

• Saw a longer groove into the other workpiece

• Now both workpieces can be positioned easily

towards each other (clearance to correct)

• Fasten the workpieces and wait till the glue is

dry

Checking the cutting depth

Fig. J

Always check the cutting depth after mounting a

saw blade.

• Disconnect the plug from the socket.

• Move the motor base (15) as far as possible

backwards.

• Set the cutting depth in the maximum position

by turning the depth adjustment knob (7).

• Move the motor base forwards till the pin (A)

will fall in the notch of the adjustment knob (7).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BJM1001 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ferm BJM1001 Manual

Product: