632767
6
Zoom out
Zoom in
Previous page
1/48
Next page
D
6
Ferm
Malfunction
If your battery charger no longer functions as it
should, this may be due to the following reasons:
The clamp has been connected wrongly. •
Check if the right clamp is connected to the
right terminal.
The safety switch is switched off.•
Battery life
The life of your battery will be considerably longer
if the following advice is taken:
Check the liquid level of the battery every •
month and, if necessary, fill it up with distilled
water.
Clean the terminals of your battery regularly to •
prevent deposit. Put a little bit of vaseline on
the terminals.
If the vehicle is seldom used, the battery will •
discharge. Therefore it needs to be charged
regularly to maximum capacity. In this way
malfunctioning can be prevented.
If everything has been checked, and the battery
charger still does not charge as it should, it needs
to be taken to the Service address on the warranty
card.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Warranty
For the conditions of warranty, please refer to the
separately provided warranty card.
BATTERIELADEGERÄT
Vielen Dank, dass Sie sich für den Kauf dieses
Ferm-Produkts entschieden haben.
Sie besitzen nun ein hervorragendes Produkt von
einem führenden europäischen Lieferanten.
Alle Ferm-Produkte werden nach höchsten
Leistungs- und Sicherheitsstandards gefertigt.
Gemäß unserer Philosophie bieten wir Ihnen
einen exzellenten Kundenservice sowie eine
vollständige Garantie auf unsere Produkte.
An diesem Produkt werden Sie noch viele Jahre
Ihre Freude haben.
Die Ziffern im nachstehenden Text verweisen
auf die Abbildungen auf Seite 2.
Lesen Sie diese Bedienungsanleitung
aufmerksam, bevor Sie die Maschine in
Betrieb nehmen. Machen Sie sich mit
der Funktionsweise und der Bedienung
vertraut. Warten Sie die Maschine
entsprechend der Anweisungen, damit
sie immer einwandfrei funktioniert. Die
Betriebsanleitung und die dazugehörige
Dokumentation müssen in der Nähe der
Maschine aufbewahrt werden.
Lernen Sie Ihr Gerät kennen
Lesen Sie vor der Verwendung des
Batterieladegeräts aufmerksam die Anleitung,
insbesondere die Sicherheitsvorschriften.
Beachten Sie die Wartungsvorschriften, um sicher
zu stellen, dass Ihr Gerät immer einwandfrei
funktioniert. Bevor Sie versuchen, das Gerät
in Betrieb zu nehmen, machen Sie sich mit der
Steuerung vertraut und stellen Sie sicher, dass Sie
im Notfall wissen, wie man es schnell abschaltet.
Bewahren Sie diese Bedienungsanleitung und alle
weiteren zum Gerät gehörigen Dokumente zum
späteren Nachschlagen auf.
Inhalt
1. Daten
2. Sicherheit
3. Installation
4. Betrieb des Batterieladegeräts
5. Wartung
BCM1019 Ma # 0810-29.1.indd 6 10/29/08 5:30:10 PM
6


Need help? Post your question in this forum.

Forumrules
1

Forum

ferm-bcm1019

Reset search

  • i need circuit diagramm of battery charger BCM 1019 6/ 12 volt. Charger refuse work well. I would like to repair by myself. Submitted on 11-1-2022 at 15:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm BCM1019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm BCM1019 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info