763843
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
EN
ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Mounting and removing the guard (fig. B)
Do not use the machine without the
guard.
Mounting
Place the machine on a table with the spindle
(3) facing upwards.
Keep the spindle lock button (2) pressed and
remove the flange (7) using the flange key (8).
If necessary, remove the grinding disc (9).
Remove the flange (10).
Mount the guard (4). Secure the guard (4) by
tightening the screw (11) and the nut (12).
Mount the flange (10).
If necessary, mount the grinding disc (9).
Keep the spindle lock button (2) pressed and
mount the flange (7) using the flange key (8).
Removing
Place the machine on a table with the spindle
(3) facing upwards.
Keep the spindle lock button (2) pressed and
remove the flange (7) using the flange key (8).
If necessary, remove the grinding disc (9).
Remove the flange (10).
Remove the guard (4) by loosening the screw
(11) and the nut (12).
Mount the flange (10).
If necessary, mount the grinding disc (9).
Keep the spindle lock button (2) pressed and
mount the flange (7) using the flange key (8).
Mounting and removing the grinding disc
(fig.B)
Do not use the machine without the
guard.
Mounting
Place the machine on a table with the guard (4)
facing upwards.
Keep the spindle lock button (2) pressed and
remove the flange (7) using the flange key (8).
Mount the grinding disc (9).
Keep the spindle lock button (2) pressed and
mount the flange (7) using the flange key (8).
Removing
Place the machine on a table with the guard (4)
facing upwards.
Keep the spindle lock button (2) pressed and
remove the flange (7) using the flange key (8).
Remove the grinding disc (9).
Keep the spindle lock button (2) pressed and
mount the flange (7) using the flange key (8).
Mounting and removing the auxiliary grip
(fig.C)
Mounting
Tighten the auxiliary grip (6) into one of the
mounting holes (13).
Removing
Loosen the auxiliary grip (6) from the mounting
hole (13).
USE
Switching on and off (fig. A)
To switch on the machine in continuous mode,
flip the On/Off switch (1) to ‘Off’
To switch off the machine, flip the On/Off
switch (1) to ‘Off’
Hints for optimum use
Clamp the workpiece. Use a clamping device
for small workpieces.
Draw a line to define the direction in which to
guide the grinding disc.
Hold the machine with both hands.
Switch on the machine.
Wait until the machine has reached full speed.
Place the grinding disc on the workpiece.
Slowly move the machine along the pre-drawn
line, firmly pressing the grinding disc against
the workpiece.
Do not apply too much pressure on the
machine. Let the machine do the work.
Switch off the machine and wait for the
machine to come to a complete standstill
before putting the machine down.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1089P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1089P in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info