763843
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
EN
Do not use the machine near flammable
materials. Risk of fire.
Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
Do not work metal with a magnesium content
of more than 80%.
Beware that the grinding disc continues to
rotate for a short period after switching off the
machine. Do not attempt to bring the grinding
disc to a standstill yourself.
Never put the machine down on a table or a
workbench before it has been switched off.
Regularly clean the ventilation slots.
Risk of electric shock.
Kickback is a sudden reaction to a pinched,
bound or twisted grinding disc, which causes
the machine to lift up and out of the workpiece
towards the user. If the grinding disc is pinched
or bound tightly by the cut, the grinding disc jams
and the machine is rapidly driven back towards
the user. If the grinding disc is twisted in the cut,
the back edge of the grinding disc can dig into
the top surface of the workpiece, which causes
the grinding disc to climb out of the cut and jump
back towards the user.
Kickback is the result of incorrect use of the
machine and/or incorrect operating procedures
or conditions. Kickback can be avoided by taking
proper precautions:
Firmly hold the machine with both hands.
Position your arms to resist kickback forces.
Position your body to either side of the
grinding disc, but not in line with the grinding
disc. Kickback can cause the grinding disc
to jump backwards. If proper precautions are
taken, kickback forces can be controlled by
the user.
Be extra careful when using the machine on
corners, sharp edges, etc. Make sure that the
grinding disc does not become jammed.
Risk of kickback.
If the grinding disc jams or if you interrupt a
cut for any reason, release the on/off switch
and hold the machine motionless in the
material until the grinding disc comes to a
complete standstill. Never attempt to remove
the machine from the workpiece or pull the
machine backward while the grinding disc is in
motion. Risk of kickback.
Do not use blunt or damaged grinding discs.
Unsharpened or incorrectly mounted grinding
discs produce narrow cuts, which causes
excessive friction and kickback and increases
the risk of the grinding discs becoming
jammed.
Do not use toothed saw blades. Do not use
woodcarving blades for saw chains.
Risk of personal injury.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
Do not use the machine if the mains cable or
the mains plug is damaged.
Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use a
extension cable reel, always fully unroll the
cable.
Technical data
AGM1089P
Mains voltage 220-240 V~
Mains frequency 50 Hz
Power input 800 W
No-load speed 11.000/min-1
Grinding disc
Diameter 100 mm
Bore 16 mm
Spindle thread M10
Weight 1.9 kg
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Wear hearing protection.
DESCRIPTION (FIG. A)
Your angle grinder has been designed for grinding
and cutting masonry and steel.
1. On/off switch
2. Spindle lock button
3. Spindle
4. Guard
5. Main grip
6. Auxiliary grip
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1089P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1089P in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info