763842
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
EN
• Donotusethemachinenearflammable
materials. Risk of fire.
• Donotworkmaterialscontainingasbestos.
Asbestos is considered carcinogenic.
• Donotworkmetalwithamagnesiumcontent
of more than 80%.
• Bewarethatthegrindingdisccontinuesto
rotate for a short period after switching off the
machine.Donotattempttobringthegrinding
disc to a standstill yourself.
• Neverputthemachinedownonatableora
workbench before it has been switched off.
• Regularlycleantheventilationslots.
Risk of electric shock.
Kickbackisasuddenreactiontoapinched,
bound or twisted grinding disc, which causes
the machine to lift up and out of the workpiece
towardstheuser.Ifthegrindingdiscispinched
or bound tightly by the cut, the grinding disc jams
and the machine is rapidly driven back towards
theuser.Ifthegrindingdiscistwistedinthecut,
the back edge of the grinding disc can dig into
the top surface of the workpiece, which causes
the grinding disc to climb out of the cut and jump
back towards the user.
Kickbackistheresultofincorrectuseofthe
machine and/or incorrect operating procedures
orconditions.Kickbackcanbeavoidedbytaking
proper precautions:
• Firmlyholdthemachinewithbothhands.
Position your arms to resist kickback forces.
Position your body to either side of the
grinding disc, but not in line with the grinding
disc.Kickbackcancausethegrindingdisc
tojumpbackwards.Ifproperprecautionsare
taken, kickback forces can be controlled by
the user.
• Beextracarefulwhenusingthemachineon
corners,sharpedges,etc.Makesurethatthe
grinding disc does not become jammed.
Risk of kickback.
• Ifthegrindingdiscjamsorifyouinterrupta
cut for any reason, release the on/off switch
and hold the machine motionless in the
material until the grinding disc comes to a
complete standstill. Never attempt to remove
the machine from the workpiece or pull the
machine backward while the grinding disc is in
motion. Risk of kickback.
• Donotusebluntordamagedgrindingdiscs.
Unsharpened or incorrectly mounted grinding
discs produce narrow cuts, which causes
excessive friction and kickback and increases
the risk of the grinding discs becoming
jammed.
• Donotusetoothedsawblades.Donotuse
woodcarving blades for saw chains.
Risk of personal injury.
Electrical safety
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate.
• Donotusethemachineifthemainscableor
the mains plug is damaged.
• Onlyuseextensioncablesthataresuitable
for the power rating of the machine with a
minimumthicknessof1.5mm2.Ifyouusea
extension cable reel, always fully unroll the
cable.
Technical data
AGM1089
Mains voltage 220-240 V~
Mains frequency 50 Hz
Power input 800 W
No-load speed 11.000/min-1
Grinding disc
Diameter 100 mm
Bore 16 mm
Spindle thread M10
Weight 1.9 kg
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Wear hearing protection.
DESCRIPTION (FIG. A)
Your angle grinder has been designed for grinding
and cutting masonry and steel.
1. On/offswitch
2. Spindle lock button
3. Spindle
4. Guard
5. Maingrip
6. Auxiliary grip
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1089 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1089 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info