763842
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
EN
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of re when used with another
battery pack.
b) Use power tools only with specically
designated battery packs. Use of any other
battery packs may create a risk of injury and
re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional safety warnings for angle grinders
• Themachinehasbeendesignedforuseas
a grinder or cut-off machine. The machine is
not suitable for operations such as sanding,
wire brushing, polishing, etc. Risk of personal
injury.
• Donotuseaccessorieswhicharenot
specifically designed and recommended by
the manufacturer. Risk of personal injury.
• Inspectthemachineandtheaccessories
beforeeachuse.Donotuseaccessories
which are bent, cracked, or otherwise
damaged.Ifthemachineoroneofthe
accessories is dropped, inspect the machine
ortheaccessoryfordamage.Ifnecessary,
replace the accessory.
• Letthemachinerunatnoloadinasafearea
aftermountingtheaccessories.Ifthemachine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
• Makesurethatthemaximumspeedforthe
grinding disc is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
• Onlyusegrindingdiscswiththecorrect
thickness and outside diameter. Refer to the
rating plate on the machine.
• Makesurethatspindlediameterofgrinding
discs, spacers, tension nuts, etc. correspond
to the diameter of the spindle on the machine.
• Makesurethatthegrindingdiscisproperly
mounted.Donotuseadaptersorotheraids
to mount grinding discs with another spindle
diameter.
• Onlyusegrindingdiscsthatarerecommended
bythemanufacturer.Onlyuseguardsthatare
specifically designed for the grinding disc.
• Onlyusegrindingdiscsthataresuitableforthe
application. For example: do not grind with the
side of a cut-off disc.
• Donotusethemachinewithouttheguard.
Securely mount the guard for maximum safety.
Makesurethattheuserisprotectedfromthe
grinding disc as much as possible.
• Makesurethattheworkpieceisproperly
supported or fixed.
• Wearsafetygoggles.Wearhearingprotection.
Wearadustmask.Ifnecessary,useother
protective means, such as safety gloves,
safety shoes, etc. Risk of personal injury.
• Keepbystandersawayfromtheworkarea.
Makesurethatallpersonsintheworkarea
wear protective equipment. Risk of personal
injury.
• Keepthemainscableawayfromtherotating
grindingdisc.Ifthemainscabletouchesthe
rotating grinding disc, your hands or arms may
come in contact with the grinding disc.
Risk of personal injury.
• Holdthemachinebytheinsulatedgripping
surfaces where the grinding disc may
contacthiddenwiringorthemainscable.If
the grinding disc contacts a ’live’ wire, the
exposed metal parts of the machine can also
become ’live’. Risk of electric shock.
• Donotusethemachinewhilecarryingitat
your side. Risk of personal injury.
• Donotusethemachineonworkpieces
requiring a maximum grinding depth that
exceeds the maximum grinding depth of the
grinding disc.
• Donotuseaccessoriesthatrequireliquid
coolants. Risk of electric shock.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferm AGM1089 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferm AGM1089 in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info