64
7. Installation of electrical devices
Should these errors occur, the codes will appear in the display on the Kathrein control system. Please note that due,
to these errors, the satellite dish may in some cases switch itself o to prevent damage to the device. If possible,
remove the source of trouble before restarting the system. Never attempt to open or modify the equipment - this must
be done by an authorised Fendt dealer!
Error
code Error name Causes To eliminate
04 Mechanical
stop
The dish has hit an obst-
ruction or is frozen.
Not enough power to ope-
rate the servomotors.
Antenna has lost its posi-
tion.
Remove the obstruction; remove snow and ice from
the dish; restart the system.
Switch o other electrical devices. Charge the
battery.
Please have the satellite dish checked by a Fendt
dealer and let them install any updates.
05 On-board vol-
tage too low
Electrical devices that
consume a great deal of
energy reduce the total
output.
Charge the battery and connect the 230V mains
connection.
Possibly switch o those devices (such as electric
heating elements) that consume a great deal of
energy.
07
No search
transponder
available.
Incorrect or manually mo-
died channel list
Have the correct list installed. Your dealer can do
this.
Problem Cause Solution
Long search times The system is searching in
the wrong region.
Set the region in which the mobile home is loca-
ted (see Chap. 7, submenu: Set position).
Satellite not found/
no reception
The mobile home is loca-
ted outside the satellite’s
footprint.
Select another satellite.
Uncontrolled perfor-
mance of the turnable
satellite dish
The turnable satellite dish
has “lost” the satellite and
cannot nd it again.
Reset the system. The reset button is located on
the back of the
CAP 650.
These problems are not errors that will cause the system to stop and send an error message.
Therefore, they have no error code.
Independent power supply
(model-specic / special accessory)
If your camper has been tted with separate equipment or the autark
package by the manufacturer, please note the following:
In the nylon folder that contains the documents for the vehicle you
will also nd the following operating instructions and connecting
diagrams:
- manufacturer‘s operating instructions for the multi-function
electrical supply / charger
Please read these important documents carefully to ensure that the
autark package functions correctly and eciently.
