443094

Fender Princeton Sterio Chorus DSP Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
A. INPUT 1 - A high-impedance plug-in connec-
tion for guitars or other instruments.
B. INPUT 2 - A lower-impedance plug-in con-
nection for guitars or other instruments with
active pre-amps.
• NOTE: Both inputs have identical impedance
when used simultaneously.
C. VOLUME - Adjusts the overall loudness of the
amplifier when the Overdrive Mode is not
selected ( {I}DRIVE SELECT switch OUT ).
• NOTE: The Overdrive Mode must be select-
ed ( {I}DRIVE SELECT switch IN ) for controls
{D}GAIN through {J}VOLUME to function.
D. GAIN - Adjusts the amount of pre-amp gain
(distortion). Use with {J}VOLUME to control
the overall amplifier loudness.
E. MID BOOST - Activates a special pre-empha-
sis filter which accentuates mid-range fre-
quencies when this switch is pressed IN.
F. LIMITER - Adjusts the amount of compres-
sion at high {D}GAIN settings. The compres-
sion is activated by distortion in the pre-amp,
therefore is not as noticeable at low {D}GAIN
settings.
G. OVERDRIVE INDICATOR - This LED illumi-
nates when the amplifier is in the Overdrive
Mode.
H. PRESENCE - Adjusts the the post-distortion
ultra-high frequency range.
I. DRIVE SELECT - Activates the Overdrive
M o d e when this switch is pressed IN.
NOTE: Both {C}VOLUME and the Channel-
Select FOOTSWITCH are disabled when this
switch is pressed IN.
J. VOLUME - Adjusts the post-distortion vol-
ume. Use with {D}GAIN to control overall
amplifier loudness.
K. TREBLE - Adjusts the high-frequency range.
L. MID - Adjusts the mid-frequency range.
M. BASS - Adjusts the low-frequency range.
N. DEFEAT - Mutes the REVERB/DELAY type
DSP Effects when this switch is pressed IN.
This switch must be OUT to enable remote
switching from the FOOTSWITCH.
O. L E V E L - Adjusts the amount of
REVERB/DELAY type DSP Effects to be mixed
in with the original dry signal.
P. TYPE - This control selects one of sixteen var-
ious REVERB/DELAY DSP Effects. The
{N } D E F E AT switch must be OUT, the
{O}LEVEL control must be above “1,” and
R E V E R B / D E L AY on the re m o t e
FOOTSWITCH (if used) must be active for this
DSP Effect to be heard. NOTE: See “DSP
STEREO EFFECTS - CONTROLS,” page 5.
Q. DEFEAT - Mutes the CHORUS/MODULATION
type DSP Effects when this switch is pressed
IN. This switch must be OUT to enable remote
switching from the FOOTSWITCH.
R. L E V E L - Adjusts the amount of
CHORUS/MODULATION type DSP Effects to
be mixed in with the original dry signal.
S. TYPE - This control selects one of sixteen var-
ious CHORUS/MODULATION DSP Eff e c t s .
The {Q}DEFEAT switch must be OUT, the
{R}LEVEL control must be above “1,” and
C H O R U S / M O D U L ATION on the re m o t e
FOOTSWITCH (if used) must be active for this
DSP Effect to be heard. NOTE: See “DSP
STEREO EFFECTS - CONTROLS,” page 5.
T. R AT E - Adjusts the sweep rate of
CHORUS/MODULATION type DSP Effects. A
lower number corresponds to a slower rate of
sweep.
U. DSP PEAK - Flashing of this LED indicates
possible clipping (distortion) in either of the
DSP Effects circuits. Periodic flashing is nor-
mal. If the LED stays on and undesirable dis-
t o rtion is heard, try reducing: {O } L E V E L ,
{R}LEVEL or the amplifier VOLUME controls.
V. POWER INDICATOR - This LED illuminates
when the amplifier is ON.
W. POWER SWITCH - Press IN the bottom of this
switch to turn the amplifier ON. Press IN the
top of this switch to turn the amplifier OFF.
6
PRINCETON CHORUS DSP - FRONT PANEL
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Princeton Sterio Chorus DSP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Princeton Sterio Chorus DSP in the language / languages: English as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info