Manual Fender MH 500 (page 7 of 20) (English)

443015

Zoom out

Zoom in

1/20

TYPE: PR 616

PART NUMBER: 2282000000 (120V, 60Hz) US, 2282001000 (110V, 60Hz) TW, 2282003000 (240V, 50Hz) AUS,

2282004000 (230V, 50Hz) UK, 2282005000 (220V, 50Hz) ARG, 2282006000 (230V, 50Hz) EUR,

2282007000 (100V, 50Hz) JPN

POWER REQUIREMENT: 1000W

POWER OUTPUT: 500W+ RMS into 2Ω @ 1%THD 400W RMS into 4Ω @ 5%THD

INPUT IMPEDANCE: 510kΩ

INPUT SENSITIVITY: (Clean Volume at maximum, all tone controls at “12 o’clock,” FX Level and Boost at minimum)

INSTRUMENT: @ 4Ω 400W: 130mV, @ 2Ω 500W: 100mV Input

POWER AMP: @ 4Ω 400W: 1.87V, @ 2Ω 500W: 1.41V Input

EFFECTS LOOP: SEND IMPEDANCE: 220Ω, RETURN IMPEDANCE: 10kΩ

FOOTSWITCH: 4-Button: Channel Select / Drive Select / Effects / Boost (P/N 064732),

FUSES: 100V-120V versions: F15A, 125V, 220V-240V versions: F8A, 250V

RECOMMENDED SPEAKERS:

MH-412 SL (P/N 2282800000), MH-412 ST (P/N 2282900000)

DIMENSIONS: HEIGHT: 8.50 in (21.6 cm), WIDTH: 29.25 in (74.3 cm), DEPTH: 11.0 in (27.9 cm)

WEIGHT: 50 lb (22.7 kg)

Product specifications are subject to change without notice.

R. EFFECTS LOOP - SEND is a preamp output that

includes onboard equalization and DSP effects.

RETURN is a power amp input. Connect only

shielded instrument cable with standard 1/4" mono

phone plugs to these jacks:

•Effects Loop - Connect SEND to your effect’s input

and RETURN to the effect’s output.

• Multiple MH-500 Amplifiers - Connect SEND on your

primary MH-500 to the RETURN on your auxiliary MH-

500. The primary MH-500 will control all the auxiliary

amplifiers. More amplifiers can be connected by

splitting the SEND signal of the primary MH-500

(using “Y”-adapters) to connect to the RETURN of

each auxiliary amplifier.

Select from 16 effect variations and combinations:

• DELAY signal echoes of various intervals and repeats

• REVERB creates the ambience of different acoustic spaces

• CHORUS and FLANGE pitch and

delay modulation in multiple stages

• VIBRATONE simulates the

“doppler effect” of a rotating

speaker

• NOISE GATE reduces noise at low

input levels. Higher FX LEVEL

settings will create a “stop–start”

effect by cutting off the guitar

signal abruptly.

• PHASER phase modulation in

multiple stages

Delay 1 slapback delay (140 ms)

Delay 2 medium delay (315 ms)

Delay 3 long delay (480 ms)

Reverb 1 large room

Reverb 2 medium hall

Reverb + Delay 3 medium hall / medium delay (235 ms)

Chorus 1 slow, deep sweep

Chorus 2 fast, light sweep

Chorus + Delay 3 fast chorus / long delay (480 ms)

Chorus + Reverb 4 fast chorus / medium hall

Flange 1 fast, light sweep

Flange 2 slow, deep sweep

Vibratone 1 medium rotation

Noisegate + Chorus 1 noisegate / deep sweep

Noisegate 2 noisegate

Phaser 1 medium sweep

✧

ff ee nn dd ee rr .. cc oo mm

✧

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fender MH 500 in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fender MH 500 Manual

Product: