Manual Fender MH 500 (page 6 of 20) (English)

443015

Zoom out

Zoom in

1/20

™™

A. INPUT - Plug your guitar in here.

B. CLEAN/DIRTY SELECT - Press to switch between

CLEAN and DIRTY channels as shown by the LEDs:

green—CLEAN channel

yellow or red—“DIRTY” (Drive) channels

C. DRIVE SELECT - Press DRIVE SELECT to switch

between TIGHT DRIVE and LOOSE DRIVE channels

(as shown by the LEDs when CLEAN/DIRTY

SELECT {B} is set to “DIRTY”):

yellow—TIGHT DRIVE channel

red—LOOSE DRIVE channel

NOTE: When CLEAN/DIRTY SELECT {B} is set to

“CLEAN,” use DRIVE SELECT to “pre-select” a DIRTY

channel as shown by the color of the footswitch LED.

D. DRIVE - Use these knobs to adjust the distortion level

of each DIRTY channel.

E. VOLUME - Use these knobs to adjust the loudness of

each channel.

F. PRESENCE - Use these knobs to adjust the ultra-high

frequency response of each DIRTY channel.

G. TREBLE / MID / BASS - Use these knobs to adjust

the high–, middle–, and low–frequency response (EQ)

of each channel.

H. BOOST - Use this knob to set a volume boost level for

all channels; useful for lead solos. Use the footswitch

to switch BOOST on–off.

I. FX LEVEL - Use this knob to adjust the level of the

selected effect. Use the footswitch to switch the

onboard effects on–off.

J. FX SELECT - Use this knob to select one of the 16

effects described on the next page.

K. POWER - Press this switch to turn the amplifier on-off

as indicated by the LED. NOTE: Turn down all 3

VOLUME knobs before switching the MH-500 on!

Rear Panel

N. POWER INPUT - Connect the included power cord to

a grounded AC outlet in accordance with the voltage

and frequency ratings specified on the rear panel of

your amplifier.

O. SPEAKER OUTPUTS - Only connect speakers with a

total impedance load equal to the SPEAKER SELECT

setting for optimal gain performance:

4Ω—Two 8Ω speakers or one 4Ω speaker

2Ω—Four 8Ω speakers or two 4Ω speakers

P. XLR LINE OUT - Balanced connection for speaker-

emulated output to a mixing console. Use LINE OUT

LEVEL to adjust the signal output level. Use

GROUND/LIFT to disconnect the ground connection

(pin-1) to reduce “ground loop” noise caused by non-

standard wiring.

GROUNDED (normal) GROUND LIFTED

Q. FOOTSWITCH - Plug the included footswitch in here.

The footswitch disables channel selection from the

front panel switches {B,C}.

One of the most powerful electric guitar amplification

systems known to man…The MH-500 Metalhead™!

• 550 Watts into 2 Ohms (a pair of MH-412 enclosures)

• 400 Watts into 4 Ohms (a single MH-412 enclosure)

• Forced-Air fan cooling

• Three-Channel preamp voiced for the new millennium

•• CLEAN—studio-pure, with tons of headroom

•• TIGHT DRIVE—covers the palette of vicious Rock

guitar tones

•• LOOSE DRIVE—combines copious distortion with

high-headroom, uncontrolled power-amp rumble

for modern drop-tuned Metal, Punk, and…beyond

•• BOOST—footswitchable boost on any channel,

effectively providing SIX channel performance

• Digital Reverb and effects including new GATE feature

• Professional speaker-emulated XLR Line Out with

Level control & Ground Lift

✧

ff ee nn dd ee rr .. cc oo mm

✧

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fender MH 500 in the language / languages: English as an attachment in your email.

The manual is 7,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fender MH 500 Manual

Product: