443009
7
Zoom out
Zoom in
Previous page
1/20
Next page
N. POWER SWITCH - Switches the amplifier on-off.
O. IEC POWER SOCKET - Connect the power cord
(included) to a grounded AC receptacle in compliance
with the voltage and frequency ratings specified on
the rear panel of your amplifier.
P. TUNER - Connect your guitar tuner here. Use
MUTE {I} to silence audio output while tuning.
Q. LINE OUT - Balanced XLR jack for output to sound
reinforcement and recording equipment.
R. GROUND LIFT - Disconnects the LINE OUT {Q}
ground connection (pin-1) which may reduce hum
noise in some situations.
GROUNDED (normal) GROUND LIFTED
S. PRE/POST EQ - Supplies the LINE OUT jack with the
signal either before or after it is processed by the
amplifier’s tone and equalization circuits.
PRE (tone/EQ bypassed)
POST (tone/EQ active)
T. LINE OUT LEVEL - Adjusts the signal output level of
the LINE OUT jack {Q}.
U. FOOTSWITCH - Connect the included footswitch to
enable remote on-off switching of REVERB,
TUNER MUTE and the EFFECTS LOOP. NOTE: The
footswitch buttons override the corresponding
controls on the front panel.
V. FX SEND / FX RETURN - (1) Effects Loop - Connect
FX SEND to your effects input and effects output to
FX RETURN. (2) Multiple Amps - Connect FX SEND
on the primary unit to FX RETURN on the auxiliary
unit. Use the primary unit’s controls.
7
ff ee nn dd ee rr .. cc oo mm
7
SS
SS
pp
pp
ee
ee
cc
cc
ii
ii
ff
ff
ii
ii
cc
cc
aa
aa
tt
tt
ii
ii
oo
oo
nn
nn
ss
ss
TYPE: PR 666
PART NUMBERS: 2289700000 (120V, 60Hz) USA 2289703000 (240V, 50Hz) AUS 2289704000 (230V, 50Hz) UK
2289706000 (230V, 50Hz) EUR 2289707000 (100V, 50Hz) JPN
POWER REQUIREMENT: 540W
PREAMP
INPUT IMPEDANCE: NORMAL: 1M –10dB PAD: 1M
SENSITIVITY AT FULL POWER: NORMAL: 19mV –10dB PAD: 40mV
NOMINAL LEVEL: NORMAL: 145mV –10dB PAD: 300mV
POWER AMP
SENSITIVITY: 1.4V R.M.S., 1kHz
POWER OUTPUT: 140W R.M.S. into 8 @ < 0.1% T.H.D., 1 kHz
TONE CONTROLS
EQ TILT: ±10dB, crossover frequency: 350Hz
BASS/TREBLE: BASS: ± 15dB @ 50Hz TREBLE: ± 15dB @ 10kHz
SEMI-PARAMETRIC MID: MID FREQ: 200Hz to 1.0kHz MID LEVEL: ±15dB @ MID FREQ setting
EFFECTS LOOP
IMPEDANCES: SEND: 1k RETURN: 11k
NOMINAL LEVEL: +4dBu (adjustable with level control)
FOOTSWITCH: Three button, included: Reverb, Tuner Mute, Effects Loop (064544)
SPEAKER: One 15", 8 Eminence
®
Legend™, made in USA (059660)
FITTED COVER: Included (065532)
DIMENSIONS: HEIGHT: 21 in (53.3 cm) WIDTH: 20 in (50.8 cm) DEPTH: 12.5 in (31.8 cm)
WEIGHT: 55 lb (24.8 kg)
Product specifications are subject to change without notice.
RR
RR
ee
ee
aa
aa
rr
rr
PP
PP
aa
aa
nn
nn
ee
ee
ll
ll
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Jazz-King at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Jazz-King in the language / languages: English as an attachment in your email.

The manual is 6,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info