442954

Fender Cyber-Deluxe Manual

31
Zoom out
Zoom in
Previous page
1/46
Next page
2) Select the desired ID number with the DATA WHEEL. The range of values
is 17—32 and Omni (“On”).
The default setting is Omni (“On”). In Omni mode, the amplifier receives SysEx
messages from all Cyber-Deluxe™ amplifier family devices on the network. In
Omni mode, if the amplifier transmits a SysEx message, then any receiving
Cyber-Deluxe™ amplifier will respond to the SysEx message regardless of its
own internal SysEx ID setting. (ID# 33 is used to accomplish this.) Select a
specific SysEx device ID# (17–32) if you wish to limit SysEx message response
only to Cyber–Deluxe™ amplifier family devices set to the same number.
Continuous Controller Echo
This menu item is used to enable / disable the retransmission of MIDI data
received by the Cyber–Deluxe™ amplifier.
1) Press UTILITY repeatedly until “Ec” is displayed (the display will then
alternate between “Ec” and the current setting).
2) Select Off (“OF”) or On with the DATA WHEEL.
The default setting is Off (“OF”). Only SysEx and channel messages
originating in the amplifier will still be transmitted through MIDI OUT.
Additionally, if set to On, all Continuous Controller channel messages
received at MIDI IN will be echoed (retransmitted) through MIDI OUT.
Memory Protect
This menu item is used to prevent your rewritable presets from being
overwritten.
1) Press UTILITY repeatedly until “Pt” is displayed (the display will then
alternate between “Pt” and the current setting).
2) Select Off (“OF”) or On with the DATA WHEEL.
The default setting is Off (“OF”). When Memory Protect is On, the amp will
remind you by displaying “no” momentarily if SAVE is pressed. Memory
Protect also discards MIDI All Preset Dumps to the amplifier and displays
“no” until EXIT is pressed. CAUTION: Memory Protect does not prevent a
Factory Presets Restore from overwriting all of your rewritable presets.
Factory Presets Restore
CAUTION: This menu item is used to restore the Cyber–Deluxe™ amplifier
to the original factory settings, including all rewritable presets and Utility
settings—even if Memory Protect is ON!
1) Press UTILITY repeatedly until “rP” is displayed.
2) To execute the restore, press the TAP button.
%
A Factory Presets Restore operation
will take several seconds to complete.
wwwwww
..
ffeennddeerr..ccoomm
✧
wwwwww
..mmrrggeeaarrhheeaadd..nneett
29
Advanced Functions
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Cyber-Deluxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Cyber-Deluxe in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info