470118
3
Zoom out
Zoom in
Previous page
1/7
Next page
The front and rear panel contains all items necessary
for system operation and observation. Please read this
section of the manual carefully to make sure you
understand all the operational features for your new
FENDER BXR 200 bass amplifier.
INPUT 1 - A high impedance, high sensitivity plug-in
connection for instruments. This input can handle as
much as 2.5 volts R.M.S., and should be used with
most instruments.
INPUT 2 - Plug-in connection for instruments. This
input is recommended for basses with active pickups,
and can handle as much as 5 volts R.M.S..
DEEP - Boosts and extends the low frequency response
of the amplifier.
NOTCH - Removes midrange, making the amp sound
“punchy.” This switch is good for “thump and pluck”
playing.
BRIGHT - adds high frequency “sparkle.”
GAIN - Adjusts the gain of the pre-amplifier and
serves as an adjustment for the “loudness” of the
amplifier.
LOW - Adjusts the low part of the frequency spectrum,
where the deep “fundamentals” reside.
HIGH - Adjusts the high end of the frequency spec-
trum. Turning up the HIGH control will add “sparkle”
to the sound.
GRAPHIC EQUALIZER - Allows precise adjustment of
the tonal characteristics of the amplifier. Each control
provides a 12 dB boost or cut to narrow bands of fre-
quencies centered about 80, 140, 250, 450, 800,
1.4k, 2.5k, 4.5k, and 8k Hz. The 80, 140, and 250
Hz controls are used to adjust the low, mid, and high
fundamental notes of the bass. The 450, 800, 1.4k,
2.5k, 4.5k, and 8k controls allow adjustment of the
timbre of the instrument, allowing for a very wide vari-
ety of tonal characteristics.
RATE - Adjusts the sweep rate of the chorus generating
circuitry. A lower number corresponds to a slower rate
of sweep.
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
BXR 200 FRONT PANEL FUNCTIONS
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender BXR 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender BXR 200 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info