470118
2
Zoom out
Zoom in
Previous page
1/7
Next page
Congratulations on your purchase of the Fender BXR
TM
200
Bass amplifier. The BXR 200 is Fender’s most recent effort
in state-of-the-art bass amplifier technology, and is a mem-
ber of the FENDER BXR series. The design of the BXR 200
was carried out with the aid of some of today’s best bass
players, and represents years of thought and consideration
in determining features and specifications. The features
included in the BXR 200 will provide a forum for almost
every conceivable playing style, from “traditional” to “con-
temporary”, and those yet to come.
The preamp section of the BXR 200 features two inputs of
differing sensitivities, allowing for the use of a wide variety
of input sources and levels. A trio of ENHANCEMENT but-
tons are provided to enhance the low, mid, and high end of
the frequency spectrum. HIGH and LOW shelving controls
allow response tailoring of the high and low frequency
sounds you and your instrument produce. The 9-band
GRAPHIC EQ allows for up to 12 decibels of boost or cut in
nine bands between 80 Hz and 8kHz. Processors from sim-
ple battery powered devices to professional rack mounted
studio effects may be used at will. This facility is accom-
plished through the use of the back panel EFFECTS LOOP
SEND and RETURN.
The rugged power amplifier is designed to give years of
reliable service under all conditions. It is equipped with our
exclusive DELTACOMP
TM
adaptive compressor system. With
DELTACOMP, it is practically impossible to clip (distort) the
power amplifier. The apparent release time of the compres-
sor is short, yet distortion at low frequencies is kept to a
minimum.
The inclusion of CHORUS infinitely widens the range of
tonalities the BXR 200 can produce. By incorporating the
chorus circuitry within the power-amp/compressor loop,
the need for complicated and expensive compounding (qui-
eting) circuitry has been eliminated.
The BXR 200 incorporates a highly efficient, computer-
designed, tuned-port cabinet, and delivers a full 200 watts
R.M.S. to its single fifteen inch Fender Special design dri-
ver. The BXR 200 HEAD is designed to perform well with
any high quality speaker system, but performs best when
used with members of the FENDER BXR series, which
include various combinations of ten inch and fifteen inch
speaker enclosure systems.
The selection of a Fender amplifier will reward you with
years of quality performance and a wide range of musical
sounds. This manual is designed to familiarize you with the
equipment and to acquaint you with its many features.
Please read it carefully so you will benefit from all the fea-
tures as soon as you start using the amplifier.
The built in quality of a Fender amplifier is the result of over
four decades of dedication, and the combined skills of
research and development by our engineers and musicians.
That is why we proudly say...FENDER, The Sound that
Creates Legends.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
INTRODUCTION
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender BXR 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender BXR 200 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info