502518
8
Zoom out
Zoom in
Previous page
1/48
Next page
8 - GB
Original operatin instructions in German
English
Product Vacuum cleaner for wet
and dry applications
Type
VCF20/1000
VCF32/1200
VCF45/1400
Read the operating manual carefully before starting to use the vacuum
cleaner. It provides important instructions for the operation, safety, care and
maintenance. Keep the operating manual in a safe place and, in case you
sell the unit, hand it on to the next owner.
The manufacturer reserves the right to carry out modications to the design
and equipment.
Any other work not covered by this operating manual must not be carried out.
Electro-technical tests must be carried out in accordance with the
accident prevention regulations (BGV A3) and in accordance with
DIN VDE 0701 Part 1 and Part 3. These tests are required in accordance with
DIN VDE 0702 at regular intervals and after repair or modication.
A dust-technical check must be carried out at least once a year by the
manufacturer or a trained person, e. g. for damage to the lter, dust-tightness
of the vacuum cleaner, function of the monitoring equipment.
The vacuum cleaners are successfully tested in accordance with IEC/
EN 60335–2–2.
1 Safety advice
The vacuum device is designed for industrial use.
Ideal in combination with an electric tool, on building sites, in
workshops, etc.
1.1 L Danger
Keep packaging material such as plastic bags away from
children.
Never stand or sit upon the vacuum device.
Particular caution is advised when ascending stairs. Pay
attention to standing safely.
Do not pull the suction hose and connection line over sharp
edges, kink it or shut it.
Always lay the suction hose and connection line so that nobody
may trip over them.
In case of any leakage of foam or liquid, immediately switch off
the vacuum device.
Always keep dry the inside of the lid.
Do not start the vacuum device including its accessories if:
the vacuum device shows detectable damage (ssures/
cracks);
the power connection line is defective or shows ssuring or
ageing; or
any invisible defect is suspected (after a fall).
Do not allow the rotating brushes to get into contact with the
power connection line.
Do not operate the vacuum device where there is danger of
explosions.
Keep away the vacuum device from inammable gases and
substances.
Do not aspirate any combustible or explosive solvents, materials
soaked in solvents, explosive dusts, liquids such as petrol, oil,
alcohol, diluents or materials hotter then 60 °C (140 °F).
Otherwise there will be danger of re and explosions!
Use the socket of the vacuum device only for the purposes
dened in the instruction manual.
In case of any inappropriate usage, improper operation or repair,
the producer shall be exempt from liability.
Do not use any damaged extension lines.
If the connector line of the vacuum device has been damaged, it
must be replaced with a special connector line which is available
from the producer or their service.
Electric brushes: Do not allow the rotating brushes to get into
contact with the power connection line.
The voltage on the type sign must correspond to the grid
voltage.
After every use and before any maintenance, switch off the
vacuum device and pull the power plug.
Pull on the plug only, not on the line.
Never plug or pull the power plug with wet hands.
The socket must be secured via a household fuse with a
suitable current rating.
Never open the vacuum device outdoors in rain or storm.
Have repairs been made only by experts, e. g. the producers
service. Use original spare parts only.
Improperly repaired devices pose a hazard for the user.
1.2 L WARNING
Persons (including children) who are, due to their physical, sen-
sory or intellectual abilities or lack of experience or knowledge,
unable to safely use the vacuum device should not use it without
supervision or instruction by a responsible person.
Particular caution is advised with children, elderly or inrm
persons.
Do not point nozzle, tube or hose at people or animals
Use only the brushes supplied with the vacuum device or
dened in the instruction manual. Use of any other brushes may
pose a safety hazard.
Clean and disinfect the vacuum device immediately after use to
prevent microbial contamination due to long-term failure to clean
it, especially when using the device in food-processing.
Do not use any steam jets or high-pressure cleaners for
cleaning.
Acids, acetone and solvents may corrode parts of the vacuum
device.
Do not leave the device without supervision. In case of longer
interruptions of work, pull the power plug.
Do not clean lter cassettes with compressed ai
Acids, alkalis and solvents can corrode the vacuum cleaner
parts.
Clean the container and accessories with water.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Felisatti VCF32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti VCF32 in the language / languages: English, German, French, Italian, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info