Manual Felisatti NTF250 (page 6 of 52) (English, German, French, Italian, Spanish)

502511

Zoom out

Zoom in

1/52

INTRODUCTION

Congratulations on your purchase of a new series

FELISATTI mitre saw, a high-quality product that will

complete your set of professional tools. This new

series represents the further evolution of the

renowned mitre saws developed by FELISATTI.

If any malfunctions ever occur during operation,

you will always be able to rely on the network of

authorised Assistance Centers. All FELISATTI

movable tools comply with Standard EN 61029,

Machine Directive 98/37/EC and amendments,

with 2006/95/EC and 93/68/EEC, and in regard to

electromagnetic compatibility, with Directive 89/336/

EEC, EN 55014.1, EN 55014.2, EN61000.3.2 and EN

61000.3.3 and EN 50366.

If used with the care and serviced regularly, this tool

will provide long-lasting and reliable service. Carefully

follow the instructions contained in this manual, using

them for reference for any eventual controls that may

need to be carried out.

1 GENERAL INFORMATION

1.1 THE AIM OF THIS MANUAL

This manual has been prepared by the Manufacturer

as an integral part of the mitre saw equipment. The

information contained is for the benet of professional

operators. This manual denes the purpose for which

the mitre saw was designed, and contains all the

information necessary to ensure safe and correct

use. We therefore recommend reading the manual

carefully before proceeding to any form of adjustment,

operation or maintenance. Constant respect for the

contents of this manual ensures both machine and

operator safety and the most economical and longest

working life of the machine itself. Photographs and

drawings have been supplied by the manufacturer for

exemplifying purposes; with the aim of following

a policy of constant development and product

modernisation, the manufacturer is entitled to make

modications without forewarning.

1.2 MITRE SAW IDENTIFICATION

Plate A (g. 1) provides mitre saw model information

and technical data of the motor and of its manufacturer;

Plate B provides mitre saw model identication.

1.2.1 IDENTIFICATION (g. 1)

A Data plate

B Logotype plate

C Upper table

D Movable upper casing

E Handgrip

F Machine lock pin

G Lower support stroke-end raised section

H Turntable

I Fixed casing

J Blade

K Machine lock knob 0°- 45°

L Turntable lock knob

M Movable lower blade protector

N Upper table ne adjustment

O Release lever

P Base

Q Support

R Main body

S Upper table locking knob

1.3 MANUFACTURER – IDENTIFICATION

Interskol Power Tools S.L.

Carretera de Sant Joan de les Abadesses s/n17500

RIPOL, (Girona), SPAIN

Tel +34972700200 - Fax +34972700554E-mail:

e-mail: felisatti@interskol.es

2 TECHNICAL CHARACTERISTICS

A sturdy, high-reliability structure ensures that these

mitre saws will be able to cut wooden boards and

PVC and aluminium pipe in industrial environments

at no expense to the machine essential handiness

or portability. All models are equipped with spacious

upper tables that permit the mitre saw to be easily

transformed into a disk saw to perform cuts of up to

40 mm thickness, engraving, facing, and trimming.

Only one operator is required for the use of the mitre

saw, which has been designed and constructed in

compliance with Standard EN 61029. All models are

equipped with release switches featuring LOCK in

‘ON’ buttons. All models come with minimum voltage

circuits that prevent the accidental restarting of the

machine after interruptions in power supply because

in such cases the operator is always required to reset

work conditions; a high-power and high-efciency

asynchronous motor ensures silent operation at all

rpm levels. The machine also comes with a motor

brake that permits the blade to be stopped within 10

seconds of the release of the button on the switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Felisatti NTF250 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Felisatti NTF250 Manual

Product: