Manual Fein KBM 65 Q (page 15 of 136) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

502025

Zoom out

Zoom in

1/136

KBM 65 Q / KBM 65 QF

Handling.

■ The chipping protector (13) must

always be mounted to protect the user

from the chippings.

The contact surface for the magnetic foot

must be smooth, clean and rust-free.

Remove any varnish or flat coat.

The core drill is unsuitable for anti-mag-

netic materials.

For guaranteeing the magnetic adhesion

force also for steel materials of less than

12 mm thickness, the work piece should

be reinforced using an additional steel

plate.

Use the correct speed as given in the table.

The coolant pump (l) for assisting the

cooling should always be mounted before

starting any work. As a coolant, a cooling

lubricant of a lighter grade should be used

that can be pumped without clogging the

pump mechanism.

Danger of injury! Danger of an

electric shock

When working on walls and ceilings avoid

any (coolant) fluid penetrating the core

drill.

Recommendation: work without using

any coolant.

For switching ON/OFF.

■ First check that the cable and plug are

not damaged.

■ Switch on the main switch (4) to

ensure that the magnet clamps and that

the drill jig is exerting its magnetic

clamping force.

■ When working on walls and ceilings,

secure the unit with a safety strap (k).

■ Switch on the drill motor.

The motor only starts running when the

main switch (4) has been switched on

first, followed by the motor switch (9).

The magnetic foot (8) is monitored by a

current sensor. If the magnetic foot (8) is

defective the motor does not run.

If the motor is overloaded, the electronics

automatically switch off. The motor can

be started again by switching the motor

switch (9) OFF and ON again.

If the current feed is interrupted while the

motor is switched on, or the power tool

is plugged in when the motor switch (9) is

switched on, the safety device prevents

the motor from running. For putting into

operation, turn the motor switch (9) OFF

and then ON again.

Setting the speed.

For core-drilling using the “FAST”

speed (9) the recommended gear must be

set using the speed switch (10).

The “SLOW” motor setting (9) reduces

the set speed by approximately one half.

This motor setting is intended for drilling

and rubbing. Halving the electrical speed

causes a reduction in power.

3 41 01 018 06 7 - Buch Seite 15 Dienstag, 16. März 2004 7:47 07

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fein KBM 65 Q in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fein KBM 65 Q Manual

Product: