502025
13
Zoom out
Zoom in
Previous page
1/136
Next page
KBM 65 Q / KBM 65 QF
13
EN
Operating instructions for core drill.
Overview.
1 Screw for setting the stroke range of
the core drill motor
Infinitely variable stroke range for a
quick, safe tool change.
2 Turnstile
Upward and downward movement of
the drill motor.
3 Depth scale
1 stroke mark stands for a 1 mm
upward and downward motion of the
drill motor.
4 Main switch
For switching the core drill ON and
OFF.
5 Support
Additional support to prevent the
magnetic drill stand from lifting.
6 Groove for safety strap
For securing the tool using the safety
strap.
7 Precision adjustment
For aligning the core drill without
displacing the magnet.
8 Magnetic foot
Secure the power tool to the magnetic
base.
9 Motor switch
For switching the drill motor ON and
OFF. Switch for setting the drill motor
speed from slow (SLOW) to
fast (FAST).
10 Gear setting for slow (•) or fast (••)
speed
Operate only when the motor has
slowed down or is at a standstill.
11 Tool holder (Quick IN)
For clamping the tool.
12 Adaptor with 3-jaw geared chuck
For clamping reamers.
13 Chipping protector
Protects the user from chips.
14 Adapter
Nut (a) has a left-handed thread.
15 Supplied accessories
Adaptor (M 18 x 6/P 1.5) (b),
Chuck with chuck wrench (c),
Long centering pin (119 mm) (d),
Short centering pin (104 mm) (e),
Chip hook (f),
Open-jawed wrench SW 22 (g),
Open-jawed wrench SW 27 (h),
Drift (i),
Socket screw wrench (j),
Safety strap (k),
Coolant pump (l),
Coolant hose (m),
Pump holder (n),
Chipping protector for 7 270 28 (o),
Chipping protector for 7 270 29 (p),
Power tool carry case, plastic (q).
For your safety.
Before using this power tool,
read and comply with:
these operating instructions,
the enclosed safety instructions
(document number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
3 41 01 018 06 7 - Buch Seite 13 Dienstag, 16. März 2004 7:47 07
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fein KBM 65 Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fein KBM 65 Q in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info