784221
24
Zoom out
Zoom in
Previous page
1/44
Next page
24
Sound selection
Point the mouse on the small ‘triangle below the writing PRESET, where initially there is the name Big Brass. Click to view the list
of the 16 sounds already programmed by the manufacturer.
Choose a sound and click the keys on the keyboard to listen to the new timbre. Every time a sound is changed, the values of the
various parameters are updated and displayed automatically.
The arrows “<“ and ”>“ allow you to select the sounds going back and forth.
The number of the sound selected is displayed with the numbers below the small triangle ( ). For example, “1/16” means that
the 1st sound of the 16 has been selected.
PRESET section
‘Triangle’ ( ) – To select a sound on the list
< > - To select a sound moving back and forth
Change nameTo assign the name to a new sound; type the new name and then click
Enter.
FileTo save or recall a sound from a folder in the PC
Save SoundTo save a sound with new parameters in the desired folder
Load SoundTo recall a sound from a folder in the PC
Save all Sound - To save the sound block in a folder of the PC
Load all SoundTo recall the sound block from a folder of the PC
Store to keyb. – It transfers all the parameters of the sound selected to one of the 16 sound locations (SOUND 201 - 216) of the TK89.
The new sound with the changed parameters stays in the memory even if the instrument turns off.
OSCILLATOR 1 and OSCILLATOR 2 sections:
OSCILLATOR 1 - To set the parameters of Oscillator number 1
VOLUME - To adjust the volume of the wave shape of oscillator 1
Wave shape – To choose among 4 wave shapes: Sinusoidal, Saw tooth, Triangular and
Square
Octave - To set the sound octaves, -1 for lower pitches or +1, +2 o +3 for higher pitches.
Semitone - To set the semitone from 0 to +11. For higher or lower semitones, move the
octave and then fix the desired semitone.
AMPLITUDE ENVELOPE - To set the amplitude envelope parameters.
The parameters are ATTACK , DECAY, SUSTAIN and RELEASE.
FILTER - To set the filter parameters.
The parameters are:
CUT OFF - To adjust the filter cut frequency
RESONANCE - To adjust the brightness of the filter
VIBRATO - To set the depth of the vibrato
FILTER ENVELOPE - To set the parameters of the filter envelope.
ATTACK - to set the attack of the filter envelope
DECAY - to set the decay
SUST. - to set sustain
RELEASE - to set release.
OSCILLATOR 2 - To set the parameters of Oscillator number 2.
The parameters of oscillator 1 and 2 have the same names but are set differently. They allow to obtain an infinite number
of combinations.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Farfisa TK 89 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Farfisa TK 89 in the language / languages: English as an attachment in your email.

The manual is 6.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Farfisa TK 89

Farfisa TK 89 User Manual - Italian - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info