698465
20
Zoom out
Zoom in
Previous page
1/80
Next page
20
TIMER FUNCTION AND AUTOMATIC
SHUTDOWN FOR THE COOKER
The timer has two functions:
1 – TIMER;
2 – AUTOMATIC SHUTDOWN of one or more cooking areas.
It is possible to set a duration up to 99 minutes.
Once the time set is over, on the display regarding time 00 is shown and a
sound warning is activated that can be deactivated pushing keys (+) or (-).
TIMER
To set:
1. If o, turn the hob on using the key and touch (+) and (-) at the same time.
2. Set the desired time touching keys (+) and (-).
Timer starts passing.
To modify time repeat the procedure from point 1.
To cancel timer:
1. If o, turn the hob on and touch (+) and (-) at the same time.
(on the Plus version the lamp is on
).
2. Touch the key ( - ) to bring time to 00.
AUTOMATIC SHUTDOWN
For the automatic shutdown function:
1 - turn on the cooker;
2 - select the cooking area;
3 - select the level;
4 - set the timer as described above.
To set the automatic shutdown for another cooking area, repeat the proce-
dure from point 2.
TIMER and AUTOMATIC SHUTDOWN can be used simultaneously.
WHAT TO DO IN CASE OF COOKERS PROBLEMS
The cooker or cooking areas do not turn on:
The cooker is not connected to the electric network.
The protection fuse is released.
Check if the block is not active.
Keys are covered with water or grease.
An object is placed on the keys.
The symbol is displayed
.
There is no saucepan on the cooking area.
The container used is not compatible with cooktops.
The diameter of the saucepan bottom is too small compared to the
cooking area.
The symbol [E] is displayed:
Disconnect and connect the cooker.
Contact the after-sales centre.
One of the area or the entire cooker turns o:
The safety overheating system is active;
The cooker or one cooking area remains on for too long;
one or more keys are covered;
one of the saucepans is empty and the bottom overheated.
The fan keeps on working after the cooker shutdown:
This is not a malfunction: the fan keeps on protecting the electronic
power unit of the device.
The fan stops automatically.
COOKERS ERROR CODES
For supporting a service technician in case of error, the UI displays error co-
des.
In combination with the provided document "error codes Basic 2" which in-
cludes datailed information a complete error matrix description is available.
E.G.O's standard error codes are listed following, customized UI can be die-
rent. In the standard general UI eroors (Er xx) and cooking zone errors (E/x)
dier. In case of cooking zone errors the display of the incorrect cooking zone
blinks alternative "E" and a hexcode "X".
Error
code
Description possible
causes
Remedy
.
The cooking zone
can be congu-
red if a static "C"
is shown
No error, the
user is in the
service menu.
A suitably pan must
be placed on the
relevant cooking
zone
.
The cooking will
be congured
if a ashing "C"
is shown. After
a successful
conguration the
relevant display
shows "-". If "-"
is not displayed
check the pos-
sible causes of
the E/5
User is in the
service menu,
no error
Wait for the symbol
"-" or abort the con-
guration activities by
pressing the select
key and the "C" will
not ash anymore.
.
A ashing "E" on
each cooking
zone indicates
that all congs
will be deleted
User is in service
menu, no error
Manual congura-
tion
.
Temperature limi-
ts are exceeded
Pt or glass
temperature is
too high
NTC -> electro-
nic temperature
too high
System must cool
down
.
Unsuitable pot,
e.g. loss of the
magnetic cha-
racteristics becau-
se of temperature
in the bottom
On the module
a pot creates
an improper
operatioing
point which can
destroy devices,
e.g IGBTs.
1. The error is auto-
matically cancelled
after 8 s and the
cooking zone can be
used again. In case
of further upcoming
errors the pot has to
be replaced.
2. The module has
to be changed if the
error comes without
a pot on the cooking
zone.
.
Uncongured
induction module
(all induction mo-
dule answer to UI,
but any element
is related to the
eected cooking
zone.)
induction
module is not
congured
Delete the hob
conguration and
activate the manual
conguration. Start
the UI service menu
to congure the
induction module if
the listed points are
not successful repla-
ce the module.
.
No communica-
tion between UI
and induction
module
No power sup-
ply of induction
module.
Bad cabling or
defect
Check power and
LIN connections. If
connection is OK,
replace the module
.
Main power
disturbance
1. Failure in
main power
frequency
detection
2. Overvoltage
Check main power
voltage and frequen-
cy, if ok replace the
module
.
Non assignable
failure
Replace module or
User interface
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falmec Quantum at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falmec Quantum in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Falmec Quantum

Falmec Quantum User Manual - Dutch - 72 pages

Falmec Quantum Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info