500340

Falcon De Luxe 1092 Continental Manual

17
Zoom out
Zoom in
Previous page
1/56
Next page
SERVICING  WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
17
You will need the following equipment
to complete the cooker installation
satisfactorily
STABILITY BRACKET
If the cooker is to be supplied
with gas through a fl exible hose,
a stability bracket or chain must
be fi tted.
These are not supplied by with the cooker but are
available at most builders’ merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with
the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1. Electric drill
2. Masonry drill bit
(only required if fi tting the cooker on a stone or concrete
fl oor)
3. Rawlplugs
(only required if fi tting the cooker on a stone or concrete
fl oor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
10. Screws for fi tting stability bracket
Positioning the Cooker
The diagrams show the minimum recommended distance from
the cooker to nearby surfaces.
The cooker should not be placed on a base.
*door opening width
The hotplate surround should be level with, or above, any
adjacent work surface. Above hotplate level a gap of 75mm
should be left between each side of the cooker and any
adjacent vertical surface.
For non-combustible surfaces (such as unpainted metal or
ceramic tiles) this can be reduced to 25mm.
A minimum space of 800mm is required between the top of the
hotplate and a horizontal combustible surface.
*Any cooker hood should be installed in accordance with the
hood man u fac tur er’s instructions.
Surfaces of furniture and walls at the sides and rear of the
appliance should be heat, splash and steam resistant. Certain
types of vinyl or laminate kitchen furniture are particularly
prone to heat damage and discolouration. We cannot accept
responsibility for damage caused by normal use of the cooker
to any material that de-laminates or discolours at temperatures
less than 65°C above room temperature.
For safety reasons curtains must not be fi tted im me di ate ly
behind the cooker.
We recommend a gap of 1115mm between units to allow
for moving the cooker. Do not box the cooker in; it must still
be possible to move the cooker in and out for cleaning and
servicing.
A clearance of 130mm is required if the cooker is near a corner
of the kitchen to allow the oven doors to open.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon De Luxe 1092 Continental at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon De Luxe 1092 Continental in the language / languages: English, German as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Falcon De Luxe 1092 Continental

Falcon De Luxe 1092 Continental User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info