Manual Falcon De Luxe 1092 Continental (page 16 of 56) (English, German)

500340

Zoom out

Zoom in

1/56

SERVICING  WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

Installation

You must be aware of the following

safety requirements & regulations

Prior to installation, ensure that the local distribution

conditions (nature of the gas and gas pressure) and the

adjustment of the appliance are compatible.

This appliance shall be installed in accordance with the

regulations in force and only in a well ventilated space.

Read the instructions before installing or using this

appliance.

In the UK:-

The regulations and standards are as follows:-

In your own interest and that of safety, it is law

that all gas appliances be installed by competent

persons. CORGI registered installers undertake to

work to safe and satisfactory standards. Failure to

install the appliance correctly could invalidate any

warranty or liability claims and lead to prosecution.

The hotplate must be installed in accordance with

All relevant British Standards / Codes of Practice,

in particular BS 5440 Part 2 2000,

For Natural Gas - BS 6172 : 1990 and BS 6891 :

1998

For LP Gas - BS 5482-1:1994 (when the

installation is in a permanent dwelling). This

appliance should not be installed in a boat or

caravan.

The Gas Safety (Installation and Use) regulations

1998.

The relevant Building / IEE regulations.

In the Republic of Ireland:-

The installation must be carried out by a

Competent Person and installed in accordance

with the current edition of I.S.813 “Domestic Gas

Installations”, the current Building Regulations and

reference should be made to the current ETCI rules

for electrical installation.

Provision of Ventilation

This appliance is not connected to a combustion

products evacuation device. Particular attention shall

be given to the relevant requirements regarding

ventilation.

In the UK

The room containing the hotplate should have

an air supply in accordance with BS 5440 Part 2 :

2000. All rooms require an openable window or

equivalent, while some rooms require a permanent

vent in addition to the openable window. The

hotplate should not be installed in a bedsitting

room with volume less than 20m3. If it is installed

in a room of volume less than 5m3 an air vent of

eﬀ ective area 100cm2 is required; if it is installed in

a room of volume between 5m3 and 10m3, an air

vent of eﬀ ective area 50cm2 is required; while if the

volume exceeds 11m3, no air vent is required.

If there are other fuel burning appliances in the

same room, BS 5440 Part 2 : 2000 should be

consulted to determine the requisite air vent

requirements.

In the Republic of Ireland:-

Reference should be made to the current edition of

IS 813 which makes clear the conditions that must

be met to demonstrate that suﬃ cient ventilation is

available.

Location of Hotplate

The hotplate may be installed in a kitchen/kitch en diner

but NOT in a room con tain ing a bath or shower.

NOTE:

An appliance for use on LPG shall not be

installed in a room or internal space below

ground level. e.g. in a basement.

Conversion

This appliance is supplied as: -

G 20 20millibar

CAT II2E3+

A conversion kit for other gases is supplied with

the cooker. If the appliance is to be converted

to another gas we recommend that this is done

before installation. See the Conversion Instructions

packed with the conversion kit. After converting

the appliance please attach the Gas Conversion

sticker over the appropriate area of the data badge,

this will identify the gas type the appliance is now

set for.

This appliance is designed for domestic cooking

only. Use for any other purpose could invalidate any

warranty or liability claim.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Falcon De Luxe 1092 Continental in the language / languages: English, German as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Falcon De Luxe 1092 Continental

Falcon De Luxe 1092 Continental User Manual - Dutch - 30 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Falcon De Luxe 1092 Continental Manual

Product: