326872
15
Zoom out
Zoom in
Previous page
1/32
Next page
15
The side arms can also be removed for
cleaning. Push them fully back and then lift them
off the rollers mounted on the grill chamber
sides.
To replace the grill parts start by hooking the
side arms onto the rollers on the grill chamber
sides.
The plate fixed to the side runner should be at
the back facing the side wall of the chamber.
To replace the carriage on the side arms, it is
easiest to first push the side arms back into the
grill chamber before engaging the rear rollers on
the side arms and then sliding it back.
Control Panel and Oven Doors
For best results liquid detergents should be
used.
The control panel and control knobs should only
be cleaned with a soft cloth wrung out in clean
hot soapy water - but take care that no surplus
water seeps into the appliance. Wipe with a
clean dampened cloth then polish with a dry
cloth. The oven doors should only be cleaned
with a soft cloth wrung out in clean hot soapy
water.
Cleaning Brass Components
Uncoated natural brass is used as part of the
authentic finish and may tarnish with age.
To regain a polished finish, these areas should
be cleaned using a proprietary cleaner such as
Brasso. Stubborn marks on the aluminium
burner rings can be removed using a similar
cleaning material. This will also restore the
polished finish.
Main Oven
The shelf supports on the oven sides can be
removed for cleaning.
First remove the oven shelves then pull the top
of the shelf support up and away from the oven
side and then lift the support away from the
locating bracket in the oven side at the bottom.
To refit the side support, first locate the tag at
the bottom of the support in the slot in the
locating bracket in the oven side.
Then locate the tops of the side arms in the
holes at the top.
The panels on the oven sides are fixed and
cannot be removed. They have been coated
with special enamel that partly cleans itself.
This does not stop all marks on the lining, but
helps to reduce the amount of manual cleaning
needed.
The Cook & Clean panels work better above
200°C. If you do most of your cooking below this
temperature, occasionally remove the shelf
supports and wipe the panels with a lint free
cloth and hot soapy water. The panels should
then be dried and the oven heated at 200°C for
about one hour. This will ensure the Cook &
Clean panels are working effectively.
Don’t use steel wool (or any other materials that
will scratch the surface). Don’t use oven
cleaning pads.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon 900 deluxe inox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon 900 deluxe inox in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Falcon 900 deluxe inox

Falcon 900 deluxe inox User Manual - German - 30 pages

Falcon 900 deluxe inox User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info