500338

Falcon 211 EEO Ceramic Manual

27
Zoom out
Zoom in
Previous page
1/32
Next page
WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity supply before servicing. Check appliance is safe when you have finished.
Page 27
3.6 TO REMOVE OVEN/GRILL NEON
Disconnect appliance from electricity supply.
a) Remove control panel as detailed in Section 3.2.
b) Remove relevant connection and undo nut securing
neon to control panel.
c) Replace parts in reverse order. Ensure replacement
functions correctly.
3.7 TO REMOVE A THERMOSTAT
Disconnect appliance from electricity supply.
a) Remove control panel as detailed in Section 3.2.
b) Remove ceramic hob as detailed in Section 3.3.
c) Open appropriate oven door and remove shelves and
linings. For RH oven, slide roof liner away and remove
fixings securing thermostat phial cover.
d) Unclip thermostat phial from clips in oven back panel.
e) For LH oven, pull unit forward to access cover box at
rear. Remove cover fixings and lift clear.
f) Feed thermostat capillary clear of oven.
g) Disconnect wires from thermostat and undo fixings that
secure control to mounting plate.
h) Fit replacement and re-assemble in reverse order. En-
sure phial is clipped to oven rear and positioned
centrally between the clips. Check thermostat functions
correctly.
3.8 TO REPLACE A GRILL CONTROLLER
Disconnect appliance from electricity supply.
a) Remove control panel as detailed in Section 3.2.
b) Remove ceramic hob as detailed in Section 3.3.
c) Disconnect leads and undo fixings which secure device
to mounting plate.
d) Fit replacement and re-assemble in reverse order.
Check replacement functions correctly.
3.9 TO REMOVE AN OVEN CUT-OFF
THERMOSTAT
Disconnect appliance from electricity supply.
a) Pull unit forward to gain access to cover box. Undo cover
screws and lift clear.
b) Control is located on earth plate beside oven element
connections.
c) Disconnect thermostat wiring. Undo fixings that secure
thermostat to earth plate and remove.
d) Fit replacement control and re-assemble parts in reverse
order.
3.10 TO REMOVE A HOB ELEMENT ENERGY
REGULATOR
Disconnect appliance from electricity supply.
a) Remove control panel as detailed in Section 3.2.
b) Remove ceramic hob as detailed in Section 3.3.
c) Disconnect regulator wiring and undo fixings that secure
device to mounting panel.
d) Fit replacement and re-assemble parts in reverse order.
Check replacement functions correctly
3.11 TO REMOVE A HOB ELEMENT
Disconnect appliance from electricity supply.
a) Remove ceramic hob as detailed in Section 3.3.
b) Disconnect element wiring.
c) Remove element spring from locating bracket by undo-
ing nut below bracket and lifting element directly upward.
d) Undo screws that secure spring to element.
e) Fit spring to new element using existing fixing holes.
f) Re-assemble parts in reverse order. Check replacement
functions correctly.
3.12 TO REMOVE OVEN DOOR
a) Open oven door and remove Handyrack (where fitted) by
removing one locating spar from bracket on the door.
Slide other spar free.
b) Support door and remove fixings that secure upper
hinge to unit front frame.
c) Remove door from lower hinge by lifting slightly and
moving it outward.
d) Re-assemble in reverse order.
3.13 TO REMOVE GRILL DOOR
a) Remove control panel as detailed in Section 3.2.
b) Remove ceramic hob as detailed in Section 3.3.
c) Remove LH side panel as detailed in Section 3.4.
d) Remove kick plate (4 screws).
e) Remove central vertical cover situated between ovens.
(5 screws).
f) Remove 2 countersunk screws (1 per side) which secure
hinge arms to front of grill chamber.
Note
The door hinge arms are spring tensioned. Carefully remove
grill door and retain the gaskets.
g) Re-assemble in reverse order. Ensure gasket is fitted be-
tween hinge arm and front of grill chamber. Check door
operation.
3.14 TO REMOVE OVEN OUTER DOOR PANEL
a) Open the oven door.
b) Remove two screws ‘A’ and two screws ‘B’ from the door.
c) Remove the outer door panel.
d) Undo the nuts that secure the handle to the door panel.
Fit the handle to the replacement door panel.
e) Fit the replacement panel to the oven inner door.
f) Re-assemble in reverse order.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon 211 EEO Ceramic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon 211 EEO Ceramic in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info