500342

Falcon 1092 CT Dual Fuel Manual

32
Zoom out
Zoom in
Previous page
1/36
Next page
SERVICING  WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
32
18 To Remove the Oven Door Seal
a) Open oven door. The seal is held in place by small
hooks on the rear face. At the corner pull seal
diagonally away from the door centre until that hook is
released.
b) Proceed to the next hook and release it in a similar
way, and so on. Use force if the hooks are stiff , as the
old seal will be discarded.
c) When fi tting new seal, position the seal join at the
bottom. Hook the new seal in one of the corner holes
of the door, and proceed round the door snapping in
each hook in turn.
19 To Adjust the Oven Door Catch Keeper
a) Open the oven door and slacken the locknut at the
keeper base.
b) Adjust the keeper inward or outward as required, until
the desired door operation is obtained.
c) Re-tighten the locknut.
20 To Remove the Hotplate Spark Generator
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
appliance rear. Remove the fi xings that secure the
cover and lift it clear.
b) Undo the terminal connections noting their positions.
c) Undo the fi xings that secure the spark generator and
remove the device.
21 To Remove the Hotplate Electrode Leads
Disconnect from the electricity supply.
Pull the unit forward to access the rear of the appliance.
a) Remove the French cooktop, pan supports, hotplate
accessories and burner heads.
b) Remove the hotplate as detailed in Section 2.
c) Remove the cover box and disconnect all HT leads at
the generator.
d) Remove the lower back panel and disconnect the lead
at the electrode.
e) Pull the sleeved bundle of HT leads up through the
rear upright.
f) Pull the appropriate lead from the sleeve and push in
the replacement.
g) Replace the leads in the rear upright.
h) Re-connect the leads at the generator and oven
electrode.
j) Re-assemble in reverse order and check ignition.
22 To Remove Oven Inner Back
a) Open the oven door. For the LH oven unscrew the 2
thermostat phial fi xing screws. Remove the fi xings that
secure the inner back to the oven rear.
b) Lift the removable panel away.
c) Re-assemble in reverse order. Ensure that the retaining
fi xings are fully tightened.
23 To Replace an Oven Fan
Disconnect the appliance from the electricity supply.
a) Pull the unit forward to access the cover boxes at the
rear of the appliance. Remove the fi xings that secure
the cover and lift it clear.
b) Remove the fan wiring, noting the connection
positions.
c) Remove the inner back as detailed in Section 22.
d) Hold the fan blades and undo the centre nut (LH
thread), brass washers, fan blade and Circlip.
e) Undo the fi xings that retain the fan and remove it from
the cavity rear.
f) Fit the replacement and re-assemble parts in reverse
order. Check that the oven operates satisfactorily.
25 To Remove an Oven fan Element
Disconnect the appliance from the electricity supply.
a) Remove oven inner back (see 22).
b) Remove 2 screws from the top of the element and 1
from the bottom of the element in side the oven.
c) Lift element out carefully, disconnect the terminals
connected to the element noting their positions. If
it is not possible to disconnect the leads in this way,
pull cooker forward to gain access to the rear, remove
screws securing the electric cover to the back sheet
and remove cover and disconnect the terminals from
the rear.
d) Fit new element, and reassemble in reverse order.
e) Check that the oven operates correctly.
26 To Remove the Left Hand Oven Bottom and Top
Elements
Disconnect the appliance from the electricity supply.
Bottom Element
a) Pull the unit forward to access the cover boxes at the
rear of the unit. Remove the fi xings that secure the
cover and lift it clear.
b) Undo the terminal connections, noting their positions.
c) Remove the fi xings that secure the bottom element
cover.
d) Undo the terminal connections, noting their positions.
e) Remove the lower element support fi xings.
f) Remove the element bracket fi xings and withdraw
element.
g) Replace the element and re-assemble parts in reverse
order.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Falcon 1092 CT Dual Fuel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Falcon 1092 CT Dual Fuel in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info