566057

Fakir MULTIPLEX Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
•
•
•
•
•
•
•
Press button to the release the multifunction head
and raise it to a vertical position.
Fit the bowl onto the appliance by turning untit
locks in position and place the ingredients in it,
weighting them as indicated under the weighing
function.
Position the cover on the head with the filling
opening at the front of the appliance.
Fit the desired accessory in the power outlet,
pushing the shaft of the accessory home and turn
it a quarter turn towards you to lock it in position.
Lower the multifunction head of the appliance to
horizontal position and press button again (a click
should be heard).
During preparation, you can add ingredients
through the opening the cover.
To stop the appliance, turn the knob back to “0”
position.
Optional accessories:
a-Using with the blender attachment:
Depending on the nature of the ingredients, the
blender can be used to prepare up to 1.4L of
mixture.
•
•
•
•
•
•
Assembling and fitting the attachment.
Assemble the blade assembly to the seal and lock
it with a quarter turn clockwise into the bottom of
the jug (the jug must be upright).
Lower the multifunction heard of the appliance to
a horizontal position and press release button
again (a click should be heard).
Press release button for cover to open the cover.
Ensure that the appliance is at a standstill before
latching on the assembled blender.
Fit the assembled blender and lock it in position
by turning it anticlockwise.
Place the ingredients in the blender jug, weighing
them as indicated under the weighing function
and then fit the cover with the measuring plug.
CAUTION
• Do not run the blender empty for more than 1
minute.
• Never fill the mixing jug with boiling fluids, you
could allow these to cool down to a room
temperature. Otherwise, the appliance could
overheat and the glass of the mixing jug could
crack. • When you use the jug operate ice, you
could select nine ices each time and the every ice
size is 40MM * 40MM * 20MM.
CAUTION
b-Using with the meat grinder attachment:
0509
Assembling and fitting the attachment;
• Insert the worm shaft into the cutter housing, the
plastic end first. Place the cutter unit onto the worm
shaft. (The cutting edges should be at the front.)
Place the fine grinding disc or coarse grinding disc
(depending on the consistency you prefer) onto the
warm shaft. (Make sure the notch of the grinding
disc fit onto the projections of the mincer head.) Turn
the screw ring in the direction of the arrow on the
cutter hosing until it is properly fastened.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir MULTIPLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir MULTIPLEX in the language / languages: English, Turkish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info