566057
12
Zoom out
Zoom in
Previous page
1/16
Next page
CAUTION!
Insert the slice cutter or
the fine bar cutter into
the cutter housing.
Attach the cutter housing
to the motor unit.
Now the appliance is
ready for slicing
Cut the potato or other
vegetable for processing
it to pieces, which size
is suitable for cutter
housing.
Choose the different kind
of cutter as requested.
Put the pieces into cutter
housing and press
slightly by pusher of the
vegetable slicer.
(Note: Never press by finger.)
10
Take off the removable cover for meat grinder
from the appliance.
Place the meat grinder cutter housing to the power
outlet for the meat grinder.
By using the release button for cutter housing,
turn the cutter housing of the meat grinder and
lock it to the appliance.
And finally, place the food tray and pusher.
• When you dissembled the meat grinder cutter
housing, you must press the release button for
cutter housing.
• Insert the pieces of meat in the feed tube piece
by piece using the pusher; never push the meat
with the finger or any other utensil.
CAUTION!
c-Using with the vegetable slicer
attachment:
Cleaning of the Appliance;
Unplug the appliance.
Never immerse the motor until in water or put it
under running water wipe it with a soft dry or
slight damp cloth.
For easier cleaning, quickly rinse the accessories
after use. Completely dismantle the mixer
attachment. Handle the blades with care, as some
have sharp cutting edges.
Wash , rinse and wipe the accessories or the can
be put in the dishwasher, except for the metal
components of the meat grinder attachment body
fine grinding disc, medium grinding disc, worm
shaft, cutter blade, coarse grinding disc and screw
ring.
The grinding disc and the blade must be kept
lubricated. Wipe them over with cooking oil after
each use.
If your accessories are discolored by food (carrots,
oranges etc), rub them gently with kitchen towel
dipped in cooking oil and then clean in the usual
way.
Blender assembly: pour hot water with a few
drops of washing up liquid into the blender jug.
Close the cover. Fit it on the appliance and give
a few pulses. Remove the blender, rinse the jug
under running water and leave it upside down to
dry .for cleaning more difficult residues, especially
with thicker preparations. The blade nut assembly
can be detached from the bottom of the jug, to
do this, place the empty blender upside down on
a flat surface, release the blade /nut assembly
with a quarter turn and lift out the seal with care.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir MULTIPLEX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir MULTIPLEX in the language / languages: English, Turkish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info